Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

G120 A8526

Created by: TG0815 at: 3/11/2015 1:05 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

3/11/2015 1:05 PM	Rate (0)
TG0815 Member Joined: 1/30/2012 Last visit: 1/9/2020 Posts: 4 Rating: (0)	Hi everybody! We received a new system with preset IP addresses for the PLC and drives. Due to our Network, the IP addresses had to change. I started with the IP address for the PLC and the drive was showing a 'BF' light and A8526. Then I went ahead and changed the IP address of the drive via P8921 and 8922, activated them with P8925=2 and verified that the new address was accepted by the drive by checking r8931 and 8932 after cycling power. I also changed the address for the drive in our PLC (which is a AB Compact Logix). The drive doesn't show the 'BF' fault anymore but the A8526 is still present. The drive shows up like nothing is wrong in the PLC program tree. Did I miss anything? I also verified the Subnet Mask and it shows the correct one. Thank you in advance for your help

Suggestion To thank Quote Answer

4/19/2015 9:16 PM	Rate (0)
Thread Posts: 10 Rating: (0)	Hi I have the same problem. Have you solve it? tnx
Thread Posts: 10 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_901229

4/11/2018 6:23 PM	Rate (0)
Taranis Member Joined: 12/11/2012 Last visit: 10/19/2018 Posts: 1 Rating: (0)	So I came across the same series of faults, however looks like my line voltage was 460 Volts / 60 Hz and I was using 400 Volts / 50 Hz. Once I used the proper voltage the problem went away.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on