Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

G120C: Inhibit communication monitoring

Created by: Osld13 at: 1/14/2014 11:25 AM (6 Replies)

Rating (0)

Thanks 3

7 Entries

1/14/2014 11:25 AM	Rate (0)
Osld13 Experienced Member Joined: 3/20/2012 Last visit: 2/24/2021 Posts: 109 Rating: (1)	Dear all, I'm using a G120C Pn. I want to mask the F8501 fault. It appears when in cut the Profinet communication. With MM440 in Profibus DP it was possible to inhibit the Communication time-out by setting P2040 to 0. I don't find any similarity. In fact, i use two CDS: - CDS0= commands by terminals, - CDS1= commands by Profinet. CDS1 will be standard. In case of Profinet failure, i'll use CDS0, and i don't want the F8501 to appear anymore. Any idea? Best regards.

Suggestion To thank Quote Answer

1/16/2014 5:39 PM	Rate (0)
Osld13 Experienced Member Joined: 3/20/2012 Last visit: 2/24/2021 Posts: 109 Rating: (1)	Hi Everybody, No idea? I would appreciate some help. Even to tell that it's not posible... Best regards.

Suggestion To thank Quote Answer

1/20/2014 3:40 PM	Rate (0)
Osld13 Experienced Member Joined: 3/20/2012 Last visit: 2/24/2021 Posts: 109 Rating: (1)	Hi, As i've got the answer, i write it. Theses parameters are for a G120C DP, (not for a Profinet one): With profibus, loosing conection makes F1920 and F7220 appear, and make the G120C stop. With P2100[0] adjusted to 1910 and P2101[0] to 0, no reaction will occur anymore when F1910 appears. And with P2100[1] adjusted to 7220 and P2101[1] to 0, no reaction will occur anymore when F7220 appears. So now, loosing connection won't stop anymore the G120C (dangerous). It now belongs to the API to switch between the two CDS. When the connection is lost, it must use the other CDS. An easy way to do it, is to compare the status Word (PZD1) send by the G120C, with zero. When it is at zero, the connection is lost. Time to switch to the other CDS. I hope this may be usefull to anyone. Best regards.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users BBPrudente abdulsh29

2/25/2014 8:12 PM	Rate (0)
BBPrudente Experienced Member Joined: 5/28/2013 Last visit: 7/9/2020 Posts: 112 Rating: (3)	Very usefull, thanks!

Suggestion To thank Quote Answer

9/14/2019 7:41 PM	Rate (0)
abdulsh29 Regular Member Joined: 9/11/2019 Last visit: 11/25/2020 Posts: 7 Rating: (0)	THANK YOU SO MUCH FOR SHARING SUCH INFORMATION I JUST WANTED TO ASK IS IT POSSIBLE TO BYPASS UNDERVOLTAGE FAULT F30003?? USING THIS METHOD
	Last edited by: abdulsh29 at: 09/14/2019 19:42:33
Suggestion To thank Quote Answer

9/15/2019 6:10 AM	Rate (0)
PISCEAN 2010 Platinum Member Joined: 4/23/2010 Last visit: 3/2/2021 Posts: 6482 Rating: (593)	abdulsh29 THANK YOU SO MUCH FOR SHARING SUCH INFORMATION I JUST WANTED TO ASK IS IT POSSIBLE TO BYPASS UNDERVOLTAGE FAULT F30003?? USING THIS METHOD Yes, you can mask out F30003. Set P2100[x] = 30003 & p2101[x] = 0. Please note, you need to set p2100 index [x] value which is already 0 & corresponding p2101 index [x] to 0 e.g. if p2100[4] is 0, modify it to 30003 & p2101[4] to be set 0. HTH

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users abdulsh29

1/4/2020 1:22 PM	Rate (0)
abdulsh29 Regular Member Joined: 9/11/2019 Last visit: 11/25/2020 Posts: 7 Rating: (0)	THANKYOU

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on