11/8/2016 9:43 AM	Rate (0)
mr_ovchinnikov Posts: 19 Rating: (0)	Good day. Help solve the problem of setting up a connection between WinCC 7.2 and the S7-1200. The server is installed SCADA WinCC 7.2 + Upd 9 and Simatic Net v8.2 SP1. Set up multiple connections to the S7-300, to which the questions asked, and one connection to the S7-1200, it does not work. At the facility is CPU-1215C controller (6ES7215-1HG40-0XB0). firmware version 4.1. On the part of the controller can ping the server. With a laptop, on which the TIA Portal V13 SP1, Step7 remotely connected and goes online with no problems, and connect WinCC does not want to. In WinCC 7.2 added standard driver "SIMATIC S7-1200. S7-1500 Chanel", it created a connection to the parameters as shown in the attachment. The Simatic Net interface PG / PC is configured. When WinCC is started, the connection to the S7-1200 gives the status of "the Disconnect", and accordingly the value of tags in the picture in runtayme not appear, although the compounds with the S7-300 controllers, with the status "OK". The controller in the network settings added station "Simatic PC station", it added communication module "IE general" and "Application" module. The module "IE general" all necessary network settings on display. The module "Application" a version of the software "Simatic Net PC software v8.1 SP2". It seems all right, but does not work, tell me which way to dig further. Attachment WinCC 72 and S7-1200.pdf (1007 Downloads)

Suggestion To thank Quote Answer

Posts: 19

Rating:

(0)

Good day.

Help solve the problem of setting up a connection between WinCC 7.2 and the S7-1200.

The server is installed SCADA WinCC 7.2 + Upd 9 and Simatic Net v8.2 SP1. Set up multiple connections to the S7-300, to which the questions asked, and one connection to the S7-1200, it does not work.

At the facility is CPU-1215C controller (6ES7215-1HG40-0XB0). firmware version 4.1.

On the part of the controller can ping the server. With a laptop, on which the TIA Portal V13 SP1, Step7 remotely connected and goes online with no problems, and connect WinCC does not want to.

In WinCC 7.2 added standard driver "SIMATIC S7-1200. S7-1500 Chanel", it created a connection to the parameters as shown in the attachment.

The Simatic Net interface PG / PC is configured.

When WinCC is started, the connection to the S7-1200 gives the status of "the Disconnect", and accordingly the value of tags in the picture in runtayme not appear, although the compounds with the S7-300 controllers, with the status "OK".

The controller in the network settings added station "Simatic PC station", it added communication module "IE general" and "Application" module.

The module "IE general" all necessary network settings on display. The module "Application" a version of the software "Simatic Net PC software v8.1 SP2".

It seems all right, but does not work, tell me which way to dig further.

Attachment

WinCC 72 and S7-1200.pdf (1007 Downloads)

11/8/2016 12:37 PM	Rate (0)
bg2492 Diamond Member Joined: 5/16/2014 Last visit: 9/12/2022 Posts: 7298 Rating: (2174)	Hello Hello mr_ovchinnikov, you should check the file "CCS7PlusChannel_01.LOG" in the folder "C:\Program Files (x86)\Siemens\WinCC\diagnose", which errors you would get there. Regards Georg Berghof
PS: If this post did really help you, you may use the Rate-button
Suggestion To thank Quote Answer

11/8/2016 12:37 PM

Rate (0)

bg2492

Diamond Member

Joined: 5/16/2014

Last visit: 9/12/2022

Posts: 7298

Rating:

(2174)

Hello Hello mr_ovchinnikov,

you should check the file "CCS7PlusChannel_01.LOG" in the folder
"C:\Program Files (x86)\Siemens\WinCC\diagnose", which errors
you would get there.

Regards

Georg Berghof

PS: If this post did really help you, you may use the Rate-button

11/9/2016 8:20 AM	Rate (0)
mr_ovchinnikov Posts: 19 Rating: (0)	Hello, in the file when the project starts in the Runtime continuously recorded one and same message. The last two entries in the file: 2016-11-09 12:05:46,758 INFO Log starting ... 2016-11-09 12:05:46,758 INFO \| LogFileName : C:\Program Files (x86)\Siemens\WinCC\Diagnose\CCS7PlusChannel_01.LOG 2016-11-09 12:05:46,758 INFO \| LogFileCount : 3 2016-11-09 12:05:46,758 INFO \| LogFileSize : 1400000 2016-11-09 12:05:46,758 INFO \| TraceFlags : c4000000 2016-11-09 12:19:20,355 INFO Log starting ... 2016-11-09 12:19:20,355 INFO \| LogFileName : C:\Program Files (x86)\Siemens\WinCC\Diagnose\CCS7PlusChannel_01.LOG 2016-11-09 12:19:20,355 INFO \| LogFileCount : 3 2016-11-09 12:19:20,355 INFO \| LogFileSize : 1400000 2016-11-09 12:19:20,355 INFO \| TraceFlags : c4000000 Attached log file, If I understand correctly, in the log file does not contain errors. Attachment CCS7PlusChannel_01.txt (623 Downloads)
Last edited by: mr_ovchinnikov at: 11/9/2016 9:18:37 AM Last edited by: mr_ovchinnikov at: 11/9/2016 9:21:17 AM Last edited by: mr_ovchinnikov at: 11/9/2016 9:21:38 AM
Suggestion To thank Quote Answer

11/9/2016 8:20 AM

Rate (0)

mr_ovchinnikov

Posts: 19

Rating:

(0)

Hello,

in the file when the project starts in the Runtime continuously recorded one and same message.

The last two entries in the file:

2016-11-09 12:05:46,758 INFO Log starting ...

2016-11-09 12:05:46,758 INFO | LogFileName : C:\Program Files (x86)\Siemens\WinCC\Diagnose\CCS7PlusChannel_01.LOG

2016-11-09 12:05:46,758 INFO | LogFileCount : 3

2016-11-09 12:05:46,758 INFO | LogFileSize : 1400000

2016-11-09 12:05:46,758 INFO | TraceFlags : c4000000

2016-11-09 12:19:20,355 INFO Log starting ...

2016-11-09 12:19:20,355 INFO | LogFileName : C:\Program Files (x86)\Siemens\WinCC\Diagnose\CCS7PlusChannel_01.LOG

2016-11-09 12:19:20,355 INFO | LogFileCount : 3

2016-11-09 12:19:20,355 INFO | LogFileSize : 1400000

2016-11-09 12:19:20,355 INFO | TraceFlags : c4000000

Attached log file, If I understand correctly, in the log file does not contain errors.

Attachment

CCS7PlusChannel_01.txt (623 Downloads)

Last edited by: mr_ovchinnikov at: 11/9/2016 9:18:37 AM

Last edited by: mr_ovchinnikov at: 11/9/2016 9:21:17 AM

Last edited by: mr_ovchinnikov at: 11/9/2016 9:21:38 AM

11/9/2016 9:37 AM	Rate (0)
Monkey's Husband Advanced Member Joined: 4/28/2015 Last visit: 11/21/2024 Posts: 11 Rating: (3)	WinCC Connection to S7-1500, S71200 and ET 200SP Entry Associated product(s) This post shows you how to use the " SIMATIC S7-1200 , S7-1500 Channel " a connection between an S7-1500, S7-1200 or ET200SP and WinCC V7.3 SE. Task The task is to provide process tags and AS messages of S7-1200, S7-1500 and ET 200SP in WinCC V7.3. Solution WinCC V7.2 provides the communication channel "SIMATIC S7-1200, S7-1500 Channel" for connection to S7-1200 and S7-1500 controllers. Communication to S7-1200, S7-1500 and ET 200SP can be realized with absolute addressing and from WinCC V7.3 also with symbolic adressing. Functions Cyclic reading of tags Chronological reporting (program alarm) Loading of AS messages (S7-1500) Password protection Time synchronization Use of the S7-1200/S7-1500/ET 200SP tags in WinCC Export/Import function 1) Export of the tags from TIA Portal (only absolute addressing) 2) Import to WinCC via the WinCC Configuration Studio Loading of AS symbols Documentation 101908495_wincc_s71200_s71500_channel_en.pdf (1,6 MB) Code Example project for WinCC (7,7 MB) Description of the last change (undated)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users OMKRIS2017

11/9/2016 9:37 AM

Rate (0)

Monkey's Husband

Advanced Member

Joined: 4/28/2015

Last visit: 11/21/2024

Posts: 11

Rating:

(3)

WinCC Connection to S7-1500, S71200 and ET 200SP

Entry
Associated product(s)

This post shows you how to use the " SIMATIC S7-1200 , S7-1500 Channel " a connection between an S7-1500, S7-1200 or ET200SP and WinCC V7.3 SE.

Task
The task is to provide process tags and AS messages of S7-1200, S7-1500 and ET 200SP in WinCC V7.3.

Solution
WinCC V7.2 provides the communication channel "SIMATIC S7-1200, S7-1500 Channel" for connection to S7-1200 and S7-1500 controllers. Communication to S7-1200, S7-1500 and ET 200SP can be realized with absolute addressing and from WinCC V7.3 also with symbolic adressing.

Functions

Cyclic reading of tags
Chronological reporting (program alarm)
Loading of AS messages (S7-1500)
Password protection
Time synchronization
Use of the S7-1200/S7-1500/ET 200SP tags in WinCC
Export/Import function
1) Export of the tags from TIA Portal (only absolute addressing)
2) Import to WinCC via the WinCC Configuration Studio
Loading of AS symbols

Documentation
101908495_wincc_s71200_s71500_channel_en.pdf (1,6 MB)

Code
Example project for WinCC (7,7 MB)
Description of the last change (undated)

This contribution was helpful to

1 thankful Users

OMKRIS2017

11/10/2016 5:31 AM	Rate (0)
mr_ovchinnikov Posts: 19 Rating: (0)	Hello, I'm doing the same thing, just add tags manually. See attached file. What am I doing wrong, tell me, please. Attachment WinCC 7.2 and S7-1200.pdf (900 Downloads)

Suggestion To thank Quote Answer

11/10/2016 5:31 AM

Rate (0)

mr_ovchinnikov

Posts: 19

Rating:

(0)

Hello,

I'm doing the same thing, just add tags manually. See attached file.

What am I doing wrong, tell me, please.

Attachment

WinCC 7.2 and S7-1200.pdf (900 Downloads)

11/14/2016 5:23 AM	Rate (0)
mr_ovchinnikov Posts: 19 Rating: (0)	Hello, In continuation of the theme "Help set up a connection between WinCC 7.2 and the S7-1200", a reference to the topic: https://support.industry.siemens.com/tf/ww/en/posts/help-set-up-a -connection-between-wincc-7-2-and-the-s7-1200 / 157327 /? page = 0 & pageSize = 10 On the question no one answered. How do I configure a connection between WinCC 7.2 and the S7-1200. Everything is done in accordance with the documentation, the connection does not work. Administrators, answer the question, why sell a license for WinCC 7.2, argue that it has a channel of communication for S7-1200 and 1500, but in fact it does not work. Maybe there is an update to WinCC? Administrators tell me, please, what can I do?

Suggestion To thank Quote Answer

11/14/2016 5:23 AM

Rate (0)

mr_ovchinnikov

Posts: 19

Rating:

(0)

Hello,

In continuation of the theme "Help set up a connection between WinCC 7.2 and the S7-1200", a reference to the topic: https://support.industry.siemens.com/tf/ww/en/posts/help-set-up-a -connection-between-wincc-7-2-and-the-s7-1200 / 157327 /? page = 0 & pageSize = 10

On the question no one answered. How do I configure a connection between WinCC 7.2 and the S7-1200. Everything is done in accordance with the documentation, the connection does not work.

Administrators, answer the question, why sell a license for WinCC 7.2, argue that it has a channel of communication for S7-1200 and 1500, but in fact it does not work.

Maybe there is an update to WinCC?

Administrators tell me, please, what can I do?

11/14/2016 10:07 AM	Rate (0)
schufri Gold Member Joined: 10/10/2014 Last visit: 11/13/2024 Posts: 1725 Rating: (210)	Hi mr_ovchinnikov Please check in the TIA Portal Configuration of your PLC if the check mark for Permit access with PUT/GET communications for remote partner (PLC, HMI, OPC,..) is set Select your S 1200 PLC. Click on right mouse. Select Protection. Scroll down The check mark for "Permit access with PUT/GET communications for remote partner (PLC, HMI, OPC,..)"must be set. In other case the Communication not works. Best regards schufri

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mr_ovchinnikov

11/14/2016 10:07 AM

Rate (0)

schufri

Gold Member

Joined: 10/10/2014

Last visit: 11/13/2024

Posts: 1725

Rating:

(210)

Hi mr_ovchinnikov

Please check in the TIA Portal Configuration of your PLC if the check mark for Permit access with PUT/GET communications for remote partner (PLC, HMI, OPC,..) is set

Select your S 1200 PLC. Click on right mouse. Select Protection. Scroll down

The check mark for "Permit access with PUT/GET communications for remote partner (PLC, HMI, OPC,..)"must be set.

In other case the Communication not works.

Best regards

schufri

This contribution was helpful to

1 thankful Users

mr_ovchinnikov

11/14/2016 12:21 PM	Rate (0)
mr_ovchinnikov Posts: 19 Rating: (0)	schufri The check mark for "Permit access with PUT/GET communications for remote partner (PLC, HMI, OPC,..)"must be set. Hi Checkbox "Permit access with PUT / GET communications for remote partner (PLC, HMI, OPC, ..)" is installed. The flag has long been established, the configuration of the PLC downloaded several times, with a check mark, and without it. It did not help. Attachment Protection.PNG (803 Downloads)

Suggestion To thank Quote Answer

11/14/2016 12:21 PM

Rate (0)

mr_ovchinnikov

Posts: 19

Rating:

(0)

schufri

The check mark for "Permit access with PUT/GET communications for remote partner (PLC, HMI, OPC,..)"must be set.

Checkbox "Permit access with PUT / GET communications for remote partner (PLC, HMI, OPC, ..)" is installed.

The flag has long been established, the configuration of the PLC downloaded several times, with a check mark, and without it.

It did not help.

Attachment

Protection.PNG (803 Downloads)

11/14/2016 12:24 PM	Rate (0)
Thomas_v2.1 Silver Member Joined: 9/15/2006 Last visit: 11/20/2024 Posts: 513 Rating: (82)	In my experience, it's not possible to let a WinCC V7.2 (or lower) or WinCCflexible station connect to a S7-1200/1500 even with "not optimized" blocks and Put/Get enabled. The reason behind this, is that WinCC and WinCCflexible try to read some SZL IDs from the PLC on connection setup. The 1200/1500 only support a very small number of SZLs. If the Plc doesn't support the SZLs, then WinCC closes the connection immediately. Communication is not possible. The solution Siemens suggests, is to use an OPC server for the connection to the 1200/1500. The Simatic.Net OPC server also reads some SZL data, but ignores when the Plc does not support all of them. The informations from the SZL responses aren't really neccessary for the communication, but forever reasons, the WinCC driver depends on them.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users OMKRIS2017

11/14/2016 12:24 PM

Rate (0)

Thomas_v2.1

Silver Member

Joined: 9/15/2006

Last visit: 11/20/2024

Posts: 513

Rating:

(82)

In my experience, it's not possible to let a WinCC V7.2 (or lower) or WinCCflexible station connect to a S7-1200/1500 even with "not optimized" blocks and Put/Get enabled.

The reason behind this, is that WinCC and WinCCflexible try to read some SZL IDs from the PLC on connection setup. The 1200/1500 only support a very small number of SZLs. If the Plc doesn't support the SZLs, then WinCC closes the connection immediately. Communication is not possible.

The solution Siemens suggests, is to use an OPC server for the connection to the 1200/1500. The Simatic.Net OPC server also reads some SZL data, but ignores when the Plc does not support all of them. The informations from the SZL responses aren't really neccessary for the communication, but forever reasons, the WinCC driver depends on them.

This contribution was helpful to

1 thankful Users

OMKRIS2017

11/14/2016 12:45 PM	Rate (0)
mr_ovchinnikov Posts: 19 Rating: (0)	Thomas_v2.1 The solution Siemens suggests, is to use an OPC server for the connection to the 1200/1500. The Simatic.Net OPC server also reads some SZL data, but ignores when the Plc does not support all of them. The informations from the SZL responses aren't really neccessary for the communication, but forever reasons, the WinCC driver depends on them. It is possible more in detail about Simatic.Net OPC server. It is included in the standard package? The Siemens licensed the box three discs: - WinCC 7.2; - SimaticNet PC Software v8.2 SP1 - SimaticNet PC Software Editor 2008 + SP6 Simatic.Net OPC server can be installed with these discs, or you need to buy separately?

Suggestion To thank Quote Answer

11/14/2016 12:45 PM

Rate (0)

mr_ovchinnikov

Posts: 19

Rating:

(0)

Thomas_v2.1
The solution Siemens suggests, is to use an OPC server for the connection to the 1200/1500. The Simatic.Net OPC server also reads some SZL data, but ignores when the Plc does not support all of them. The informations from the SZL responses aren't really neccessary for the communication, but forever reasons, the WinCC driver depends on them.

It is possible more in detail about Simatic.Net OPC server.

It is included in the standard package?

The Siemens licensed the box three discs:

- WinCC 7.2;

- SimaticNet PC Software v8.2 SP1

- SimaticNet PC Software Editor 2008 + SP6

Simatic.Net OPC server can be installed with these discs, or you need to buy separately?

Help set up a connection between WinCC 7.2 and the S7-1200

Created by: mr_ovchinnikov at: 11/8/2016 9:43 AM (24 Replies)

Rating (2)

Thanks 4

25 Entries

Entries per page: 10 | 20 | all

mr_ovchinnikov

Attachment

bg2492

mr_ovchinnikov

Attachment

Last edited by: mr_ovchinnikov at: 11/9/2016 9:18:37 AM

Last edited by: mr_ovchinnikov at: 11/9/2016 9:21:17 AM

Last edited by: mr_ovchinnikov at: 11/9/2016 9:21:38 AM

Monkey's Husband

WinCC Connection to S7-1500, S71200 and ET 200SP

This contribution was helpful to

mr_ovchinnikov

Attachment

mr_ovchinnikov

schufri

This contribution was helpful to

mr_ovchinnikov

Attachment

Thomas_v2.1

This contribution was helpful to

mr_ovchinnikov

25 Entries

Entries per page: 10 | 20 | all

Related topics by keywords:

Follow us on

Created by: mr_ovchinnikov at: 11/8/2016 9:43 AM (24 Replies)

Rating (2) Thanks 4

25 Entries

Entries per page: 10 | 20 | all

Attachment

Attachment

Last edited by: mr_ovchinnikov at: 11/9/2016 9:18:37 AM

Last edited by: mr_ovchinnikov at: 11/9/2016 9:21:17 AM

Last edited by: mr_ovchinnikov at: 11/9/2016 9:21:38 AM

WinCC Connection to S7-1500, S71200 and ET 200SP

This contribution was helpful to

Attachment

This contribution was helpful to

Attachment

This contribution was helpful to

25 Entries

Entries per page: 10 | 20 | all

Related topics by keywords:

Follow us on

Rating (2)

Thanks 4