Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How can synchronize the time of starter with PLC or system?

Created by: mohsen62 at: 7/10/2016 7:23 AM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

7/10/2016 7:23 AM	Rate (0)
mohsen62 Advanced Member Joined: 11/29/2014 Last visit: 1/26/2021 Posts: 78 Rating: (2)	Hello I want to change the time of starter software from work time to real time.I must to set the address in the "select message frame"page but it is not possible.How can i change it?which address must be set?and what should I do for this task? otherwise I need that the time of starter be synchronous with PLC or system. best regard mohsen bagheri

Suggestion To thank Quote Answer

7/11/2016 8:33 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/25/2021 Posts: 18847 Rating: (2353)	Hello, the Time of Starter you can change , STARTER use the Windows Time. What do you mean with the "message frame" page? Doy oyu have a screen or online help for this? Normaly you set the PLC Time from you Windows System and synchronize this time to the SINAMICS, now the messages and Faults from the Sinamcis are displayed in UTC (+offset for the actual time). Regards Christoph

Suggestion To thank Quote Answer

7/12/2016 9:26 AM	Rate (0)
mohsen62 Advanced Member Joined: 11/29/2014 Last visit: 1/26/2021 Posts: 78 Rating: (2)	hello actually, my problem is this,that how can change the time in starter software?because it's time is not synchron with PLC now. message frame is 1 page in starter software and is related to communication with PLC.other wise we can set the standard of communication between PLC & DRIVE on it. I am waiting for more help. best regard mohsen bagheri

Suggestion To thank Quote Answer

7/12/2016 9:27 AM	Rate (0)
mohsen62 Advanced Member Joined: 11/29/2014 Last visit: 1/26/2021 Posts: 78 Rating: (2)	starter don't use windows time,now

Suggestion To thank Quote Answer

7/12/2016 10:13 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/25/2021 Posts: 18847 Rating: (2353)	Hi, 1.) STARTER have no Time setting! 2.) starter can never sync a PLC Time Which Time you mean? I think you mean the timestamps of Messages of the drive in the Alarm tab of Starter, right? This is no starter time, this is the drive time! If you don't synchronize the drive with the PLC Time starter display the working hour of the drive. Regards Christoph

Suggestion To thank Quote Answer

7/12/2016 12:55 PM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 1/31/2021 Posts: 881 Rating: (61)	SINAMICS S: Time synchronization between S7-300/400/1200/1500 and S120 https://support.industry.siemens.com/cs/ww/en/view/88231134

Suggestion To thank Quote Answer

7/12/2016 1:06 PM	Rate (0)
mohsen62 Advanced Member Joined: 11/29/2014 Last visit: 1/26/2021 Posts: 78 Rating: (2)	yes, my means is the time of alarm & fault in alarm tab of starter.it is the working time of drive. how can I synchronize the drive with the PLC Time?

Suggestion To thank Quote Answer

7/12/2016 1:23 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/25/2021 Posts: 18847 Rating: (2353)	mohsen62 yes, my means is the time of alarm & fault in alarm tab of starter.it is the working time of drive. how can I synchronize the drive with the PLC Time? show in the link above from zako regards christoph

Suggestion To thank Quote Answer

7/13/2016 6:36 AM	Rate (0)
mohsen62 Advanced Member Joined: 11/29/2014 Last visit: 1/26/2021 Posts: 78 Rating: (2)	hi now we reach to my question exactly,in the help procedure(in link),there is one step that I should put the address on the software(on message frame configuration page);but it is not possible.it means, the Tab don't recieve every address and on the related boxes,there is"?"&"!".... best regard mohsen bagheri

Suggestion To thank Quote Answer

7/13/2016 7:17 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/25/2021 Posts: 18847 Rating: (2353)	mohsen62 hi now we reach to my question exactly,in the help procedure(in link),there is one step that I should put the address on the software(on message frame configuration page);but it is not possible.it means, the Tab don't recieve every address and on the related boxes,there is"?"&"!".... best regard mohsen bagheri page ,Capter in the document?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on