2/13/2011 5:34 AM  
Joined: 4/23/2010 Last visit: 11/17/2019 Posts: 5400 Rating: (374) 
Hello Experts, At present my shop total connected load is 1100 Kw & max demand reached is 225 KVA, nature of connected load is heavy industrial load (heavy machine + fabrication shop) with average load factor of 13%. My shop is under expansion phase & immediated future connected load is as follows. Connected load will be 1500 Kw. Now my question is forthis additional load of 1500 Kw, even with assuming my present load factor as 13%, what capacity capacitor load bank I should plan & connect to my system. Can any one guide/help me? Thanks in advance. DEEP. 
2/15/2011 5:40 AM  
Joined: 4/23/2010 Last visit: 11/17/2019 Posts: 5400 Rating: (374) 
Hello Experts, Is my question correct? or it is posted in wrong product conference? DEEP. 
2/15/2011 6:40 AM  
Joined: 4/23/2010 Last visit: 11/17/2019 Posts: 5400 Rating: (374) 
Hello Experts, Is my question correct? or it is posted in wrong product conference? DEEP. 
2/15/2011 7:06 AM  
Joined: 8/21/2008 Last visit: 11/12/2019 Posts: 141 Rating: (6) 
Hi Below shows the power vector diagram. The power consists of active, reactive and apparent power Active power (VI cosØ) > \ Ø  \  \  \  Reactive Power (VI sinØ) \  \  \  \ Active power (P) = V*I*cosØ Reactive power (S) = V*I*sinØ Apparent power (Q) = V*IHere the useful power is the active power and the reactive power is due to the lagging power factor due to the connected loads. This power factor varies with each load and you need a power factor monitoring equipment to check the power factor each time. To find out the capacitive bank you should know the system power factor (system power factor can be measured by a power factor meter when all the system is connected) Here, you have 1500 kW load. Ie, P = 1500 Hence S = 1500 / cosØ And Q = sqrt(S^{2} – P^{2}) To compensate the power to unity, you need to provide “Q” amount of capacitive power. 
Last edited by: RBM at: 2/15/2011 7:07 AM 

2/15/2011 10:29 AM  
Joined: 4/23/2010 Last visit: 11/17/2019 Posts: 5400 Rating: (374) 
Active power (P) = V*I*cosØ Reactive power (S) = V*I*sinØ Apparent power (Q) = V*IHere the useful power is the active power and the reactive power is due to the lagging power factor due to the connected loads. This power factor varies with each load and you need a power factor monitoring equipment to check the power factor each time. To find out the capacitive bank you should know the system power factor (system power factor can be measured by a power factor meter when all the system is connected) Here, you have 1500 kW load. Ie, P = 1500 Hence S = 1500 / cosØ And Q = sqrt(S^{2} – P^{2}) To compensate the power to unity, you need to provide “Q” amount of capacitive power. Hi RBM, Thanks for your reply. I know therotical what is meant by power factor & how to improve it. My question is for addition of 1500 Kw, connected load, with say 15% of LF, with heavy induction type of load, what size & capacity capacitors, or capacitors banks needs to be connected? Thakns, DEEP. 
2/22/2011 11:02 AM  
Joined: 2/4/2010 Last visit: 9/3/2019 Posts: 64 Rating: (4)

Hi deep, On http://support.automation.siemens.com/WW/view/en/25432888/133300Siemens offers "Planning Manual  Planning with SIVACON S8, ...". I think chapter 7.3 in this manual provides the requested information. Regards Sentronix

2/22/2011 11:56 AM  
Joined: 4/23/2010 Last visit: 11/17/2019 Posts: 5400 Rating: (374) 
Hi Sentronix, Thank you very much for your reply. Istudied the mentioned chapter & found as useful. The chapter states to calculate the addtion/corrective capacitor bank, provided we know the values of KWH & KVArH. But my question is how to calculate the capacitor bank value beforehaving/knowing these information i.e. when we know the total connected load value in KW only.(Designe related, like suppose if I have to add 900 KW load induction type, with LF of 20%, what rating capacitor bank should I connect) Hope I am able to elaborate my query. Thanks. DEEP. 
2/28/2011 11:25 AM  
Joined: 2/4/2010 Last visit: 9/3/2019 Posts: 64 Rating: (4)

Hi deep, It is simply as RMB mentioned in his answer. For any consumer  existing or future installation  you know active power and power factor, so you are able to calculate reactive power. On http://en.frako.de/servicesdownloads,tabId,2269.htmlthere is available "Manual of Power Factor Correction"by company FRAKO.In addition todetailed calculations it provides approximate estimates (page 9). Regards Sentronix 
2/28/2011 11:59 AM  
Joined: 8/21/2008 Last visit: 11/12/2019 Posts: 141 Rating: (6) 
Hi DEEPSTR2010 The link below gives a brief idea about calculating the capacitance value. here also u need to know the pf of the connected load. dont know if this helps... (if u want to calculate the capacitance value then above link helps you) rgds, RBM

3/1/2011 10:46 AM  
Joined: 4/23/2010 Last visit: 11/17/2019 Posts: 5400 Rating: (374) 
Hi RBM, Thanks for your reply. But this is not the one I am looking for. 
12/12/2013 8:29 AM  
Joined: 5/1/2009 Last visit: 8/16/2019 Posts: 140 Rating: (1) 
I think this link usufal 
Best regard 

Follow us on