1/20/2012 5:56 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872) |
Hi |
Last edited by: DEEPSTR2010 at: 1/20/2012 6:47 AM |
|
1/21/2012 3:22 AM | |
Posts: 41 Rating: (0) |
Hi, I want to change the parameter P330 from 0 to 1 |
1/22/2012 4:17 AM | |
Posts: 41 Rating: (0) |
Thanks Umencho, If i can change the parameter from Linear to Parabolic, how the output reacts? |
9/13/2012 11:43 PM | |
Joined: 6/4/2008 Last visit: 4/23/2024 Posts: 1481 Rating: (322)
|
Hi, the last few posts on here might help a little, if your drive is locked, you need the passkey from the OEM. https://www.automation.siemens.com/tf/WW/en/Posts/72297 Did you mean Fault FF05, as there is no F005 witha CUVC? Regards, Graeme |
2/8/2018 7:50 AM | |
Joined: 6/19/2017 Last visit: 4/24/2024 Posts: 7967 Rating: (162) |
New question published by DK Sarraf is split to a separate thread with the subject How to change the r61001 parameter for communication to the intouch without any software?. Best regards |
My Forum is the place to personalize your profile, |
|
Follow us on