11/7/2014 7:56 AM | |
Posts: 12 Rating: (0) |
Hello guys, i need help on how to connect the CU310-2 PN via LAN by using STARTER software? thank you for your help.
|
11/7/2014 9:15 AM | |
Joined: 5/12/2006 Last visit: 3/28/2024 Posts: 22162 Rating: (2962)
|
Hi, use accessible Nodes in STARTER to see which IP is activ on your CU! Regards Christoph |
11/7/2014 9:39 AM | |
Posts: 12 Rating: (0) |
Hi ChristophD, thank you for the reply. I did the Accessible nodes, and the result as shown in the picture below. is it like that? thank you. |
11/7/2014 10:11 AM | |
Joined: 5/12/2006 Last visit: 3/28/2024 Posts: 22162 Rating: (2962)
|
Hi, yes is see. only the Starter include Drives are listed, so you have installed no SSP. You can Download SSP an actual Starter here. and here. And Note: In your Project you have created a CU310 PN, not a CU310-2 PN ! Regards Christoph |
This contribution was helpful to1 thankful Users |
11/7/2014 10:22 AM | |
Posts: 12 Rating: (0) |
Thank you for your help, ChristophD. I try to install this software first and get back to you if I have problem with it. |
2/16/2015 12:25 PM | |
Posts: 9 Rating: (1) |
Hello snar88 try to change access point to S7 ONLINE. Attach new version of installed device. |
3/10/2016 8:22 PM | |
Joined: 4/28/2015 Last visit: 1/2/2024 Posts: 1 Rating: (0) |
hello, the default ip adress for x127 port is 169.254.11.22. I think you must set the PG ip adress in the same net regards |
Follow us on