How to Reset Safety Parameters in Sinamics G120c

hello,

in attachment i put the list from downloading.

i don't use a Memory card.

the firmware version of starter is V4.3.3.0 and the version of my drive: V4.7.

but i don't think that this is the problem: because i have 2 other drive's that are the same version and there it's works without a problem.

i also try to ofline select of the safety modus and try to download but it is not posssibel.

Looks like it is asking for an acceptance test.  Do whatever causes your safety stop (usually emergency stop) and it should be complete.

You also have an analog wire break alarm.  Not sure what is causing that but probably not related.

hellow,

i try to do an acceptance test but this don't work.

this wire brake is because i select 4-20mA with detection but this signal is now off

this download list, is this target system output?

Hi azzy,

Not sure or it will help, but check this.

https://support.industry.siemens.com/tf/ww/en/posts/g102c-profinet-safety-integrated-function-configuration/139349/?page=0&pageSize=10

I only made mistake in post name (G102 - should be G120)

hi,

nothing works.

is there a way to do a sort of hard reset?

mvg,