Skip to Content

support.automation.siemens.com | Technical Forum | Tuesday, January 19, 2021 1:21:39 AM

Print

IEC 61850 configurator

Created by: Amahrit at: 9/27/2017 6:33 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

9/27/2017 6:33 PM	Rate (0)
Amahrit Advanced Member Joined: 3/17/2017 Last visit: 4/30/2019 Posts: 32 Rating: (0)	Hello everyone, I have an issue, I didn't find the Logical Node GGIO to report the I/O information and event information in digsi 5 and IEC 61850 configurator for digsi 5, and also the state of the frontal LEDs of Siprotec 5 Relays. Thank you all,

Suggestion To thank Quote Answer

9/29/2017 3:24 PM	Rate (0)
Amahrit Advanced Member Joined: 3/17/2017 Last visit: 4/30/2019 Posts: 32 Rating: (0)	For helpful information, The problem is solved, there is no default LN for binary inputs/outputs in DIGSIs' IEC 61850 structure. We need to add a SPS and match it in the matrix with the source ( BI or BO ).

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

11/13/2017 11:49 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 1/18/2021 Posts: 4407 Rating: (73)	New question published by AutoGen_148962 is split to a separate thread with the subject Tags through RTU are not updating. Best regards Jen_Moderator

Suggestion To thank Quote Answer

11/22/2020 4:23 AM	Rate (0)
manh khuong Member Joined: 10/31/2019 Last visit: 12/6/2020 Posts: 1 Rating: (0)	i'm facing the same problem,so pleaseto explain more clearly that how to add sps signal. Thank you

Suggestion To thank Quote Answer