Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Import Protool Project into Flexible 2008 SP3

Created by: Fabio068 at: 4/21/2012 1:51 PM (30 Replies)

Rating (7)

Thanks 7

Result pages:: |; 1 | 2 | 3 | 4; |

31 Entries

Entries per page: 10 | 20 | all

4/21/2012 1:51 PM	Rate (0)
Fabio068 Experienced Member Joined: 7/16/2008 Last visit: 2/16/2021 Posts: 80 Rating: (1)	I installed WinCC Flexible 2008 SP3 on Windows 7 32 bit. With this configuration I'm not able to import Protool Prject. There is no more command in main menu (see attached image) Is something change? Anyone tried to do same job? Thank you Ciao Attachment MainMenuWinCCFlexible2008SP3.jpg (2035 Downloads)

Suggestion To thank Quote Answer

4/21/2012 1:56 PM	Rate (1)
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 7/28/2020 Posts: 1750 Rating: (264)	Fabio068 I installed WinCC Flexible 2008 SP3 on Windows 7 32 bit. With this configuration I'm not able to import Protool Prject. There is no more command in main menu (see attached image) Is something change? Anyone tried to do same job? Thank you Ciao upps it in not in English hence unable to understand. Wait our other friends will tell you. But you are not getting an option called Open a Protool Project?
	VANDE MATARAM.....
Suggestion To thank Quote Answer

4/21/2012 2:02 PM	Rate (0)
Fabio068 Experienced Member Joined: 7/16/2008 Last visit: 2/16/2021 Posts: 80 Rating: (1)	Sorry is in italian. Anyway there no choice, normally the last,related to Protool (any language is always Protool I imagine).

Suggestion To thank Quote Answer

4/21/2012 4:13 PM	Rate (1)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 2/27/2021 Posts: 4205 Rating: (791)	Fabio068 I installed WinCC Flexible 2008 SP3 on Windows 7 32 bit. With this configuration I'm not able to import Protool Prject. There is no more command in main menu (see attached image) Is something change? Anyone tried to do same job? Thank you Ciao Hello it won't be possible. If you have WinCC Flexible 2008 SP2 installed on another station with WinXP, then you cand do it easily. Please check this entry: delivery release: Service Pack 3 for SIMATIC WinCC flexible 2008 Entry ID:57267466 Because of the neccessary changes for the 64 Bit support under Windows 7, the ProTool migration cannot be offered any more with Service Pack 3 for WinCC flexible 2008. Hope this helps.
	Ayman Elotaify
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mindware

4/22/2012 8:47 AM	Rate (0)
Fabio068 Experienced Member Joined: 7/16/2008 Last visit: 2/16/2021 Posts: 80 Rating: (1)	Ayman I read documents about SP3 but probably not the right one or probably I lost this few line. Thank you Ciao

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users kumarpravat51

4/22/2012 8:54 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (989)	Fabio068 Ayman I read documents about SP3 but probably not the right one or probably I lost this few line. Thank you Ciao Anyway, it is very hard to understand WHY Siemens cut this very importand feature in SP3. unbelievably...
IBN-Service Posts: 8946 Rating: (989)
Suggestion To thank Quote Answer

4/22/2012 8:57 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 1/7/2021 Posts: 10217 Rating: (1159)	It might wants to forget about Protool.

Suggestion To thank Quote Answer

4/22/2012 9:01 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (989)	UMENCHO It might wants to forget about Protool. maybe, but to "forget" ProTool needs alway a conversation to WinCCflex. btw. I like ProTool still very much.
IBN-Service Posts: 8946 Rating: (989)
Suggestion To thank Quote Answer

4/22/2012 9:04 AM	Rate (2)
IBN-Service Posts: 8946 Rating: (989)	Fabio068 I installed WinCC Flexible 2008 SP3 on Windows 7 32 bit. With this configuration I'm not able to import Protool Prject. ... Idea: Upload the ProTool Project to the forum, I am quite sure that a lot of people like to convert the project to Flexibel for you...
IBN-Service Posts: 8946 Rating: (989)
Suggestion To thank Quote Answer

4/22/2012 9:14 AM	Rate (2)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 1/7/2021 Posts: 10217 Rating: (1159)	IBN-Service ... btw. I like ProTool still very much. Yes, why not. When you are familiar with some software the normal thing is to like it. I almost sure that if someone said: I hate (doesn't want to work) with some software (specially Protool)...the real sentence is: I don't know how/what to do? IBN-Service ... Idea:Upload the ProTool Project to the forum, I am quite sure that a lot of people like to convert the project to Flexibel for you... Aaa that's it.You stars automatically increased by one. best regards, Hristo Mihalev

Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

31 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on