Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Integration of I/O from SIMATIC ET 200S to SIMOTION D435-2

Created by: Claudiu G. at: 8/29/2013 8:25 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

8/29/2013 8:25 AM	Rate (0)
Claudiu G. Posts: 21 Rating: (0)	Hello all , I would like to know the procedure that I have to follow to Integrate the I/O from theSIMATIC ET 200S to SIMOTION D435-2. Thanks all
Claudiu G. Posts: 21 Rating: (0)	Last edited by: Claudiu G. at: 8/29/2013 8:25 AM
Suggestion To thank Quote Answer

8/29/2013 8:34 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/22/2021 Posts: 18983 Rating: (2375)	Hello, go to the adresslist of the SImotion Din Scout. Create a new symbol and then in the adresstabthe adress of the IO. Or specify the problem a little bit exactly! Regards Christoph

Suggestion To thank Quote Answer

8/30/2013 2:06 PM	Rate (0)
Claudiu G. Posts: 21 Rating: (0)	Hello CristophD , I thank you for the fast reply . Hopefully the information I'll provide now will make possible a more precise explanation. I have an ET 200S connected via ethernet to an D435-2 PN/DP. I would like to know a way to use the I/O from the ET 200S in a ST. source file in simotion D435-2. The solution you first provide does not seem to be vaiable. I'll attach you the hardware configuration in netpro so you can see what I mean and need. For ex how can I access the input I 0.0 from ET 200S in Simotion. Thank you, Claudiu Attachment NetPro config.jpg (149 Downloads)
Claudiu G. Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/30/2013 2:30 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/22/2021 Posts: 18983 Rating: (2375)	Hello, ok now i see you haven't a ET200S I/O Station. You have a ET200S CPU Station. In this case there is no way to integrate the ET200S I/O Adresses directly in SIMOTION. Easiest way is to copy the I/O's on the ET200S site to a PN transfer area and simotion work with this data. So you must create a publisher / suscriber slot in ET200S and SIMOTION. Then wirte a program on ET200S side to copy the data from the I/O modules to this transfer area. On Simotion Side you can acces this transfer with the adresslist. Regards Christoph

Suggestion To thank Quote Answer

8/30/2013 2:39 PM	Rate (0)
Claudiu G. Posts: 21 Rating: (0)	Thank you for the reply I understand what I have to do now. Do you have an example , or any documentation , or a similar procedure to create that "publisher" slot . Any help would do alot as it is my first time implementing this. Regards, Claudiu
Claudiu G. Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/30/2013 2:47 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/22/2021 Posts: 18983 Rating: (2375)	Hello, a good Step by Step is described in the SIMOTION Communication Manual Refer the capter 4.4 and 4.7. Regards Christoph

Suggestion To thank Quote Answer

8/30/2013 3:22 PM	Rate (0)
Claudiu G. Posts: 21 Rating: (0)	Thank you again If I'll have further questions I will write you here. Claudiu
Claudiu G. Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on