11/17/2006 7:55 AM | |
Posts: 433 Rating: (48) |
Hello Najafabadipour, J_Bell means this faq What compatibility does SIMATIC WinCC V 5.x have? and this faq With what is SIMATIC WinCC V 6.x compatible?. Tomcat |
Last edited by: Tomcat at: 11/17/2006 8:05 AM |
|
11/17/2006 10:14 AM | |
Posts: 5822 Rating: (411)
|
Thank you Tomcat, you are right, I took the wrong Entry IDs... [:blush:] Thanks again J_Bell |
11/19/2006 8:18 AM | |
Posts: 25 Rating: (0) |
Hi, Thank youbut can someone help me about BCE license? Best Regads, B.Najafabadipour |
11/26/2006 4:25 PM | |
Posts: 25 Rating: (0) |
Dear Sirs, Thank you for your helps but I still hope someone help me more on using BCE license. Best regards, B.Najafabadipour |
12/2/2006 7:40 AM | |
Posts: 25 Rating: (0) |
Dear J_Bell, First of all thank you for your helps. If I use an AUI to RJ45 converter (same as what I found infollowing link http://www.alliedtelesyn.com/products/details.aspx?141) then can I use an ordinary switch hub (or simple hubs) instead of the star cuppler hub? Best regards, B.Najafabadipour |
12/4/2006 9:34 AM | |
Posts: 1776 Rating: (95) |
Hi, have a look a the following link chapter 1 Also have a look at the FAQ |
12/4/2006 10:15 AM | |
Posts: 5822 Rating: (411) |
Hello, I can tell you that it is no deal to use any other Switch you want instead of the ASGE Star coupler, as long as you do not use the SNMP with it, if you use the SNMP functions of the ASGE Star coupler you will have to change a bit of your configuration but that’s it. The CP1430 you mentioned does not need the AUI RJ45 Transceiver you talked about earlier. The CP requires a special cable that switches the Interface from AUI to ITP which is signal compatible with RJ45. This cable is mentioned in the Catalogue IK PI 2007. I add to this Post a short extraction of an older version of the IK PI for you to see. Best regards J_Bell AttachmentRJ45_-_15_pin_Cable_76.pdf (320 Downloads) |
Follow us on