Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is my program-code correct ?

Created by: mirip at: 9/7/2014 4:25 PM (16 Replies)

Rating (5)

Thanks 9

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

9/10/2014 7:09 PM	Rate (0)
William_B Posts: 5225 Rating: (1102)	Kahl Hi William! Thanks for the idea of using spreadsheets! I was fighting with flowchart drawing programs, because my boss wants to improve our machine documentations. I was able to convince him to use spreadsheets. Kahl, It is good that the spreadsheet idea works for you guys. You did see the sample file in the 1st attachment? I use spreadsheet intensively, espcially when processing messages to/from HMIs. Spreadsheets works very well for To Do Lists. If ever you want to do the flow chart thing.. there is an add-on available that makes flow charting much easier to do on M$ Office Excel. Otherwise there are x2 other products I could suggest.. but you will have to ask per Private Message for detail. Greetings. w
William_B Posts: 5225 Rating: (1102)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Kahl

9/16/2014 4:24 PM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 12/15/2020 Posts: 204 Rating: (9)	Hello, here is my final program. Please, if there are any suggestions, do not hesitate to send me comments. thank you Attachment test3_skip.zip (58 Downloads)

Suggestion To thank Quote Answer

9/17/2014 6:21 PM	Rate (0)
William_B Posts: 5225 Rating: (1102)	Hi there, The format looks much better. I can see there is much work put into its construction. Sadly, this program still needs work........................................ * What will make the machine stop?... reset allow_run? * What will happen if I press START while the machine is busy with a cycle? * Network 4 is going to cause an issue * Network 11 & 13 ..why the positive latch? ..why the 1sec pulse? * If "allow_run" is OFF, would that mean we can ignore the stop sensors? I am not going to be able to do a full analysis without writing the program for you. So from here on forward I can wish you only "Good Luck!". w
William_B Posts: 5225 Rating: (1102)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mirip

9/18/2014 1:01 PM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 12/15/2020 Posts: 204 Rating: (9)	Thank you William for your patience and support. In reality, it was for testing the skip-code. Here is the real program. Attachment skip_real.zip (43 Downloads)
	Last edited by: mirip at: 9/18/2014 1:03 PM
Suggestion To thank Quote Answer

9/18/2014 7:18 PM	Rate (1)
William_B Posts: 5225 Rating: (1102)	....... network 3 prevents all running.
William_B Posts: 5225 Rating: (1102)
Suggestion To thank Quote Answer

9/18/2014 9:06 PM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 12/15/2020 Posts: 204 Rating: (9)	Thank you. Thoughtlessness ... This correction Attachment Network_3.zip (29 Downloads)

Suggestion To thank Quote Answer

9/22/2014 5:04 PM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 12/15/2020 Posts: 204 Rating: (9)	Hello, Here are the finalized code(pdf and mwp). If there are comments, thank you. Attachment SKIP_FINAL.zip (42 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on