3/14/2012 6:33 PM | |
Joined: 4/22/2010 Last visit: 2/15/2024 Posts: 5697 Rating: (711)
|
Hello, First i don't know this card. How long it takes to learn depends on your skills and experience. you can start with the manual to see what's needed to use this card. http://support.automation.siemens.com/WW/view/en/14952610 hope that's the right one, if not give us the Mlfb off the card. As with most cards you cannot use the card with every CPU. Hope this helps you a bit further. Regards, Marcjan |
Last edited by: Marcjan at: 3/14/2012 6:36 PMProblem solved? |
|
3/14/2012 6:58 PM | |
Joined: 3/21/2006 Last visit: 4/4/2024 Posts: 10228 Rating: (1181) |
Hello, And of course training course - Training: Technology Module FM 458 Best regards, Hristo Mihalev |
This contribution was helpful to1 thankful Users |
3/15/2012 4:16 AM | |
Joined: 8/25/2006 Last visit: 4/19/2024 Posts: 2203 Rating: (277) |
Hello. In addition I may say that besides Step7 you will need alsoCFCandD7-SYSsoftware. This is required to program FM458. |