7/16/2012 12:50 PM | |
Posts: 69 Rating: (2) |
Another Screenshot |
7/17/2012 9:03 AM | |
Posts: 69 Rating: (2) |
Hi All, Which CP card I need to select for simulation ....please help. Thanks, Soju |
7/17/2012 5:36 PM | |
Posts: 3037 Rating: (192)
|
Hello, You should connect your PC system with your PLC in Devices & Networks. You can use for simulationthe Communications module "IE general". Tweety |
7/19/2012 12:23 PM | |
Posts: 3037 Rating: (192)
|
Hello soju, you need a HMI connection between PC System and PLC. See the chapter 9.11.2.2 WinCC Professional V11.0 SP2 Tweety |
This contribution was helpful to1 thankful Users |
7/25/2012 2:05 PM | |
Posts: 69 Rating: (2) |
Hi All, Still I'm not able to see the active status of the Tag in WINCC. Please find the attached program for your reference. Please help. I am not able to have the communication established between 312C Cpu and Wincc. I am using MPI _ USB Adaptot. Thanks, Soju AttachmentTo_Send.zip (233 Downloads) |
7/25/2012 4:58 PM | |
Posts: 3037 Rating: (192)
|
Hello, |
7/26/2012 7:07 AM | |
Posts: 69 Rating: (2) |
Hi Tweety, I tried using both ie both professional and advanced but still not able to communicate. Thanks, Soju |
Last edited by: soju at: 7/26/2012 11:03 AM |
|
7/31/2012 2:05 PM | |
Posts: 69 Rating: (2) |
Hi All, I am trying still some error. Plz find the attached logs which I am getting. Thanks, Soju |
8/1/2012 11:24 AM | |
Posts: 3037 Rating: (192)
|
Hello, You use this CP 5611 A2 for MPI commection. You can see it in the following manual on page 43. Installation Instructions/Product Information CP 5611 A2 Tweety |
This contribution was helpful to1 thankful Users |
8/16/2012 2:15 PM | |
Posts: 69 Rating: (2) |
Hi Tweety, Problem Solved..... Working perfetly for WINCC Advanced. But Runtime is not active if I am taking WINCC professional. Why it's like that. Thanks, Soju |
9/3/2015 3:52 PM | |
Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4774 Rating: (123) |
New question published by asljivo1 is split to a separate thread with the subject control Motor from WinCC. Best regards |
Follow us on