Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Little maths help

Created by: thedodgy1 at: 3/20/2020 6:02 PM (4 Replies)

Rating (1)

Thanks 2

5 Entries

3/20/2020 6:02 PM	Rate (0)
thedodgy1 Experienced Member Joined: 11/11/2017 Last visit: 12/31/2020 Posts: 99 Rating: (3)	i hope someone can help me out here because i am loosing all my hair! i want to input a pressure value of say -10Pa and give a voltage out, the range of the pressure will -124Pa to 124Pa and the voltage output will 0-10v the voltage is being inputed into a VFD and its not reading the pressure, i am telling it the pressure what it needs to achieve if that makes sense but i can not work out the maths to convert it. thanks

Suggestion To thank Quote Answer

3/20/2020 6:15 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/18/2021 Posts: 20949 Rating: (2309)	Where come the -10 Pa from? From Display of the LOGO!? Or from HMI? Or a sensor?

Suggestion To thank Quote Answer

3/20/2020 6:35 PM	Rate (0)
thedodgy1 Experienced Member Joined: 11/11/2017 Last visit: 12/31/2020 Posts: 99 Rating: (3)	from the TDE

Suggestion To thank Quote Answer

3/20/2020 6:37 PM	Rate (1)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 1/18/2021 Posts: 20949 Rating: (2309)	Here's a simple example. If you want a limiting for the input then wrote it. Attachment Converting_pressure_to_voltage_0BA8.Standard.zip (21 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users thedodgy1

3/20/2020 6:43 PM	Rate (0)
thedodgy1 Experienced Member Joined: 11/11/2017 Last visit: 12/31/2020 Posts: 99 Rating: (3)	THANKS a lot!!! i knew i had to divide by 248 but i just could not figure out the rest.. cheers your a star

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on