Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LOGO!Monitor Multi communication problem

Created by: mouris70 at: 5/6/2012 12:23 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/6/2012 12:23 PM	Rate (0)
mouris70 Member Joined: 11/26/2011 Last visit: 1/18/2014 Posts: 3 Rating: (0)	Hello again I have configured LOGO!Monitor multi latest Version: 2.1.0.321 according to the instructions in the user manual but does not understand the change of inputs and outputs. This can not be transferring data from LOGO to PC Displays the following messages "- Trying to connect to Logo 1: logo1 192.168.10.60" "- Successfully connected to Logo 1: logo1 192.168.10.60" I have programmed a button VB address: 0 Bit: 0 and accept the command in LOGO device On Status bar of logo!Monitor the LED remains red What could be wrong? Please help!!!!
	Last edited by: mouris70 at: 5/6/2012 1:18 PM
Suggestion To thank Quote Answer

5/7/2012 7:52 AM	Rate (0)
Helmut_13 Platinum Member Joined: 7/24/2006 Last visit: 10/26/2018 Posts: 2928 Rating: (417)	Hi, post you programm so we can test it. Regards.

Suggestion To thank Quote Answer

5/7/2012 8:29 PM	Rate (0)
mouris70 Member Joined: 11/26/2011 Last visit: 1/18/2014 Posts: 3 Rating: (0)	Hello thanks for reply Attachment test.zip (78 Downloads)

Suggestion To thank Quote Answer

5/9/2012 4:50 PM	Rate (0)
mouris70 Member Joined: 11/26/2011 Last visit: 1/18/2014 Posts: 3 Rating: (0)	The communication problem was been solved! Everything works perfectly with the latest version of Logo!Monitor Multi Thank to Glenn Rexwinkel Logo!Monitor Best regards
	Last edited by: mouris70 at: 5/9/2012 7:02 PM
Suggestion To thank Quote Answer

| |

Related topics by keywords:

Follow us on