Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Missing enables G120 drive

Created by: Lindy128 at: 2/12/2019 5:59 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/12/2019 5:59 PM	Rate (0)
Lindy128 Member Joined: 7/12/2018 Last visit: 2/14/2019 Posts: 8 Rating: (0)	Hello all, Using the control panel in STARTER to try and run the drive I am receiving the following missing enables: Bit 08 - safety enable missing 17 - OFF2 enable internal missing 18 - OFF3 enable internal missing 30 - speed controller inhibited Any ideas how to get these enables active? Thank you. JL

Suggestion To thank

2/13/2019 5:54 AM	Rate (0)
ChristophD Diamond Expert Joined: 5/12/2006 Last visit: 2/19/2019 Posts: 15366 Rating: (1754)	https://support.industry.siemens.com/tf/ww/en/posts/g120-switching-on-inhibited/207965/?page=0&pageSize=10

Suggestion To thank

2/13/2019 7:22 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 2/18/2019 Posts: 3137 Rating: (39)	Closed cause question posted twice. The second thread with the subject G120 switching on inhibited is published within the conference Drive Tools. Best regards Jen_Moderator

Suggestion To thank

| |

Follow us on