Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Modbus with LMV 51 and ALZ 5 process value send and receive

Created by: Kmrulh at: 11/16/2018 10:06 AM (15 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

11/22/2018 9:55 AM	Rate (0)
Kmrulh Regular Member Joined: 11/8/2018 Last visit: 2/20/2019 Posts: 16 Rating: (0)	Hallo Kaulquappe, you meant that Transport of the LMV5 data via ET200M , CP-341 RS 232 to the 400 H PLC" control is possible. Master : Modbus_Comm_Load and Modbus_Master Modbus_Comm_Load, Modbus_Slave this function block i can be used ?? or I must be use P_SND_RK, P_RCV_RK MODB_441 If have any sample program it would be helpful for me. Attachment ET 200M.jpg (17 Downloads)

Suggestion To thank Quote Answer

11/22/2018 2:39 PM	Rate (0)
Kaulquappe Platinum Expert Joined: 11/27/2007 Last visit: 2/20/2019 Posts: 2688 Rating: (268)	Hello Kmrulh, P_SND_RK and P_RCV_RK are required. When you install Modbus master a sample and the manual are installed as well. Regards, Kaulquappe

Suggestion To thank Quote Answer

2/11/2019 10:06 AM	Rate (0)
Kmrulh Regular Member Joined: 11/8/2018 Last visit: 2/20/2019 Posts: 16 Rating: (0)	Hallo , For Step 7 400, I have CPU 414-5 H PN/DP and ET 200M ( CP 341-RS232C), I want to read data LMV51 Burner Over AZL5, I want to use this function block P_SND_RK, P_RCV_RK Is it possible to read data with this configuration ??

Suggestion To thank Quote Answer

2/11/2019 11:37 AM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 2/20/2019 Posts: 149 Rating: (4)	Hello examples Attachment Download.aspx.pdf (4 Downloads)

Suggestion To thank Quote Answer

2/11/2019 11:38 AM	Rate (0)
SAR-CNT Silver Member Joined: 1/23/2013 Last visit: 2/20/2019 Posts: 149 Rating: (4)	Tia v13 sp1 examples Attachment Burner-Communication_V13_SP1.zip (4 Downloads)

Suggestion To thank Quote Answer

2/11/2019 1:32 PM	Rate (0)
Kmrulh Regular Member Joined: 11/8/2018 Last visit: 2/20/2019 Posts: 16 Rating: (0)	SAR-CNT Tia v13 sp1 examples Thanks for your reply But i want to use Step 7 400, Not Tia Portal , I have CPU 414-5 H PN/DP and ET 200M ( CP 341-RS232C), I want to read data LMV51 Burner Over AZL5, I want to use this function block P_SND_RK, P_RCV_RK Is it possible ??

Suggestion To thank Quote Answer

| |

Follow us on