Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

multiproject with WincCCFlex - not possible copy RAM to ROM

Created by: Ignat at: 8/20/2014 3:20 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

8/20/2014 3:20 PM	Rate (0)
Ignat Advanced Member Joined: 9/12/2013 Last visit: 3/20/2020 Posts: 23 Rating: (0)	Hello! I'm trying to create a small project in SCOUT which is consisted from SIMOTION part and integrated WinCC Flex project. I've made compiling and it have been finished ok. But when Im trying to download it and make copy RAM to ROM there is an error: "Error occurred while loading to target system; copy RAM to ROM not performed for any device. Please observe the outputs in the"Target system output" detail view" And in "Target system output" I see the following message: "Transferring Device_1 (WinCC flexible Runtime) Establishing connection to device... Transfer failed!" I need HMI for testing my project and planning to run it on my PC. So, I set my PC's IP for Device_1. The configuration of the Device_1 is following: WinCC flexible RT HMI IE (192.168.0.194 connected to Ethernet_1) I don't understand why it's not working. I've seen the same structure in RotaryKnife project. I attached my NetPro configuration Attachment NetPro1.jpg (27 Downloads)
	Last edited by: Ignat at: 8/20/2014 3:21 PM Last edited by: Ignat at: 8/20/2014 3:21 PM
Suggestion To thank Quote Answer

8/20/2014 3:27 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/6/2020 Posts: 17611 Rating: (2131)	Hello, can you load the WinCC RT from the WinCCflex ES? I think the problem is that scout can't load the HMI Devices. Which Software Version do you use? Regards Christoph
	Last edited by: ChristophD at: 8/20/2014 3:29 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ignat

12/22/2014 7:29 AM	Rate (0)
Ziemens Silver Member Joined: 3/2/2007 Last visit: 2/27/2020 Posts: 695 Rating: (5)	how did you solve this problem?
	... thank you ...
Suggestion To thank Quote Answer

12/22/2014 7:37 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/6/2020 Posts: 17611 Rating: (2131)	Hi, the problem is solved in th following way: load the WinCC project with winccflex ES. unselect the HMI device from the list of online devices in scout. regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on