5/20/2016 12:43 PM | |
Posts: 200 Rating: (6) |
thanks for the reply for some reason i don't get a text field option just root screen |
5/20/2016 12:45 PM | |
Posts: 200 Rating: (6) |
AttachmentDoc1.pdf (181 Downloads) |
Last edited by: Min_Moderator at: 5/20/2016 1:47:15 PMConvert attachment |
|
5/20/2016 1:02 PM | |
Joined: 1/30/2006 Last visit: 3/21/2024 Posts: 310 Rating: (57) |
You have to insert a textbox from your Toolbox, Basic Object. Mark it and se the properties for that object |
BR. Sven |
|
5/20/2016 1:31 PM | |
Posts: 200 Rating: (6) |
how do you create the dummy project as i have tried this but cant see where things are done |
5/20/2016 10:17 PM | |
Posts: 5225 Rating: (1184) |
Hi. For the moment I have no way of knowing what you want to do. If you can ZIP your HMI project and add it here, it might help. It may also help you to look at the project example: Focus on the HMI part of the example. It is not the same device, but much of the workings are the same. Where they use touch buttons, you will use hardware buttons only. Look through the document and work through all the properties of all the elements. It is a bit difficult to explain the fundamentals in text. See if you cannot convince someone closer to you to give you the 30minute kick-start tour. Good luck. |
5/20/2016 10:28 PM | |
Posts: 200 Rating: (6) |
|
5/21/2016 8:16 AM | |
Posts: 200 Rating: (6) |
zip attached
AttachmentAsh Manor.zip (90 Downloads) |
5/21/2016 9:37 AM | |
Posts: 5225 Rating: (1184) |
Andrew, I hoped I would understand what you want to do after seeing the project you sent. But I failed at that. I would think you would want to select between AUTO and MANUAL modes with F1 and F2. It does not make sense to me to have "while pressed" on there. I would expect "set bit" and "reset bit". F1 ... (a) set AUTO (b) reset MANUAL Also the SETPOINTS are bits where I expect to see VW word memory defined as INT data type. Regardless.... From what I understand what you ask, I have added some elements in your program. Note that I have added VW0 memory that is grouping bits V0.0 to V1.7 together as a unit. VW0 is then used to display a message. WARNING: Message 9 is linked to V0.1 and Message 0 is linked to V1.0. Pictures are also included to try and guide you further. w AttachmentProjectWithPics.zip (112 Downloads) |
5/24/2016 1:34 PM | |
Posts: 200 Rating: (6) |
When I press F2-F10 I get a message displaying the button that's been pressed when I press F1 I get no message |
Follow us on