Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Output field tag

Created by: allayahassine at: 5/21/2014 1:06 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

5/21/2014 1:06 PM	Rate (0)
allayahassine Advanced Member Joined: 3/5/2014 Last visit: 6/20/2014 Posts: 133 Rating: (0)	Hello, I have an output field tag assigned to MD 32 (a REAL tag from the SIMATIC MANAGER program). When I compile, a message appear "there is no tag configured for that field". Is that because WinCC Flexible does not accept REAL tags ? help me, thanks!!

Suggestion To thank Quote Answer

5/21/2014 1:27 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 8/22/2019 Posts: 5564 Rating: (659)	Hello, Perhaps you could show us the configuration with help of some printscreens. Tell us more about the used HMI and PLC. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

5/21/2014 1:37 PM	Rate (0)
allayahassine Advanced Member Joined: 3/5/2014 Last visit: 6/20/2014 Posts: 133 Rating: (0)	here is the configuration and the message. Attachment here.zip (27 Downloads)

Suggestion To thank Quote Answer

5/21/2014 1:57 PM	Rate (0)
Madhava Silver Member Joined: 11/26/2011 Last visit: 10/18/2019 Posts: 508 Rating: (19)	Configuring real field is not a problem. Check whether you have assigned the tag properly.

Suggestion To thank Quote Answer

5/21/2014 3:00 PM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/27/2019 Posts: 4152 Rating: (773)	Hello, Go to Communication in the LHS navigator of WinCC flexible project, then go to tags, and check the type of this tag. You have to define it as "REAL". Hope this helps.
	Ayman Elotaify MISC Egypt www.miscegypt.com
Suggestion To thank Quote Answer

5/21/2014 3:16 PM	Rate (0)
Darío Fdez Advanced Member Joined: 5/19/2014 Last visit: 12/2/2019 Posts: 29 Rating: (1)	Hello allayahassine: You have to set the process variable in the "General" tab in the output field configuration, not in the "Animation" tab. Regards Darío Fernández
	Last edited by: Darío Fdez at: 5/21/2014 3:20 PM
Suggestion To thank Quote Answer

5/21/2014 3:44 PM	Rate (0)
allayahassine Advanced Member Joined: 3/5/2014 Last visit: 6/20/2014 Posts: 133 Rating: (0)	thanksDarío Fdez, it worked as you said.

Suggestion To thank Quote Answer

| |

Follow us on