Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PC adapter USB A2 and S7 200

Created by: montis at: 5/22/2014 7:34 AM (8 Replies)

Rating (3)

Thanks 8

9 Entries

5/22/2014 7:34 AM	Rate (0)
montis Posts: 2 Rating: (0)	Good day, I have PC adapter USB A2 (6GK1571-0BA00-0AA0). Is it possible to program a S7-200 PLC with this adapter? I tried several times using Microwin, but I failed to connect to PLC. Although this adapter works fine with S7-300.
montis Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users EngAB

5/22/2014 7:42 AM	Rate (2)
sbartoc Bronze Member Joined: 3/3/2014 Last visit: 3/29/2021 Posts: 199 Rating: (7)	The answer is here https://www.automation.siemens.com/tf/WW/en/Posts/108166

Suggestion To thank Quote Answer

5/22/2014 7:50 AM	Rate (1)
SolutionFinder Posts: 559 Rating: (86)	montis Good day, I have PC adapter USB A2 (6GK1571-0BA00-0AA0). Is it possible to program a S7-200 PLC with this adapter? I tried several times using Microwin, but I failed to connect to PLC. Although this adapter works fine with S7-300. You cab absolutely use the same to communciate with S7-200 PLC.
SolutionFinder Posts: 559 Rating: (86)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Saeed Bahadori AymericProteis

5/22/2014 8:41 AM	Rate (0)
Ayman Elotaify Platinum Expert Joined: 5/28/2008 Last visit: 4/11/2021 Posts: 4215 Rating: (791)	montis Good day, I have PC adapter USB A2 (6GK1571-0BA00-0AA0). Is it possible to program a S7-200 PLC with this adapter? I tried several times using Microwin, but I failed to connect to PLC. Although this adapter works fine with S7-300. It should work as6GK1571-0BA00-0AA0is sucessor of6ES7972-0CB20-0XA0 Please revise your settings in Set PC/PG interface. Hope this helps.
	Ayman Elotaify
Suggestion To thank Quote Answer

5/26/2014 7:20 PM	Rate (0)
montis Posts: 2 Rating: (0)	Good day, I read the manual for my adapter USB A2 and set PG/PC interface to "Universal" Profibus bus profile in Microwin. It works perfectly. Thank You all for replies
montis Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Ayman Elotaify Worawut genious2015

6/27/2014 8:52 PM	Rate (0)
Narrator1 Bronze Member Joined: 3/25/2013 Last visit: 3/21/2019 Posts: 183 Rating: (1)	New question split intoPC adapter USB A2 and S7 200 - port 1 its not communicating. With best regards, Narrator1

Suggestion To thank Quote Answer

9/24/2020 12:29 AM	Rate (0)
Grégori Fernandes... Advanced Member Joined: 7/16/2015 Last visit: 1/24/2021 Posts: 14 Rating: (1)	I was able to communicate with S7-200 using Step7 MicroWin V4.0 SP9, Windows 7 and PC Adapter USB 2 (6GK1 571-0BA00-0AA0) with following configurations:

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users dchartier AutoGen_4920909

2/12/2021 10:33 AM	Rate (0)
Scretchers Member Joined: 1/22/2021 Last visit: 2/23/2021 Posts: 2 Rating: (1)	Alyamani, hello. Try installing as an administrator, and it might help. Judging by the error codes, there's a problem with either the location or the access. Or with memory (that's my guess). Are you able to try another cable? If you have links to suppliers, like link, try ordering a cable from them, at least temporarily. I think with a second one, and you should be able to figure it out.
	Last edited by: Scretchers at: 02/12/2021 10:34:51 Last edited by: Scretchers at: 02/23/2021 06:43:45 Last edited by: Jen_Moderator at: 03/30/2021 10:05:11 Removed link, because it's an advertisement.
Suggestion To thank Quote Answer

3/30/2021 6:46 AM	Rate (0)
bhargavp Regular Member Joined: 7/9/2016 Last visit: 3/30/2021 Posts: 6 Rating: (0)	Following Video might help. https://youtu.be/Qxtm_aiMNNI
	Last edited by: Jen_Moderator at: 03/30/2021 10:02:38 Embedded video.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on