Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PC477

Created by: boris_sh at: 8/19/2015 5:53 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/19/2015 5:53 AM	Rate (0)
boris_sh Experienced Member Joined: 6/7/2010 Last visit: 9/12/2019 Posts: 42 Rating: (1)	Hello, PC477 has blue screen. Can i replace pc477 with S7-300.

Suggestion To thank Quote Answer

8/19/2015 6:14 AM	Rate (0)
boris_sh Experienced Member Joined: 6/7/2010 Last visit: 9/12/2019 Posts: 42 Rating: (1)	WinLC RTX V4.4 (for WinAC RTX 2008, 6ES7 671-0RC06-0YA0); Software Logic Controller for Windows XP with Ardence RTX Realtime environment V8.1; DP connection (DP master); DPV1 with constant bus cycle time and isochronous mode; PROFINET connection; PROFINET IO-Controller; supports RT/IRT; PROFINET CBA; PROFINET CBA-Proxy; TCP/IP transport protocol; Routing; S7 communication; firmware V4.4

Suggestion To thank Quote Answer

8/19/2015 6:16 AM	Rate (0)
ChristophD Diamond Member Joined: 5/12/2006 Last visit: 12/7/2019 Posts: 16998 Rating: (2028)	Hello, yes you can, but is not simple! You must create a new project with the S7-300 Copy you Programs from the IPC Project to the S7-300 project, configure the decebtral peripherie new. If you have runing HMI like WinCC RT on the IPC then you must now change to a external Panel or other PC with HMI SW. I think is better you look why you get the bluescreen an show if you can solve the problemn the IPC. Other thing is that S7-300 have not the performance of the IPC. Regards Christoph

Suggestion To thank Quote Answer

8/19/2015 7:27 AM	Rate (0)
boris_sh Experienced Member Joined: 6/7/2010 Last visit: 9/12/2019 Posts: 42 Rating: (1)	Thank you,

Suggestion To thank Quote Answer

| |

Follow us on