12/18/2013 2:28 PM | |
Posts: 62 Rating: (0) |
Hello, thankyou for the reply. Now it has gotten even worse. It can't access the digital outputs of the PLC. As soon as I changed the access type to absolute insted of symbol it started to work again.
Strange. Dropbox link: [snip] ... Regards AttachmentD:\tmp\download\Forum_example_v1.zip (319 Downloads) |
Last edited by: CS Moderator at: 12/19/2013 11:38 AMproject attached |
|
1/16/2014 11:12 AM | |
Joined: 9/24/2013 Last visit: 4/17/2024 Posts: 36 Rating: (0) |
Hello. Did You solved the problem ? I get the same error.
|
1/28/2014 12:36 PM | |
Joined: 8/19/2013 Last visit: 3/6/2024 Posts: 148 Rating: (10) |
before un- and reinstalling did you use SP1 and Updates on TIA V12? Didyou try that? |
1/28/2014 1:56 PM | |
Posts: 62 Rating: (0) |
Yes SP 1 is installed for all the components of TIA portal v12. Step7 Basic WinCC Comfort/Profesional There are no other updates as far as I know...
|
1/28/2014 2:34 PM | |
Joined: 8/19/2013 Last visit: 3/6/2024 Posts: 148 Rating: (10) |
you can download UPD 3 for V12 SP1 here -> http://support.automation.siemens.com/WW/view/en/78683919 |
1/28/2014 2:58 PM | |
Posts: 62 Rating: (0) |
Thank you, I'll install them and give it a try. Will report back. Thank you!!! Best regards A
|
4/10/2014 5:44 PM | |
Joined: 1/22/2014 Last visit: 4/8/2024 Posts: 32 Rating: (0) |
Thank you for this info SarnoldAppliedc I already received V13 per post and will install it.... like V10, V11, V12, SPxxx, Updates xxxx.... best regards |
Follow us on