3/16/2009 10:35 AM | |
Posts: 92 Rating: (7) |
dear Mr.Razi, please check the following on your side, 1. please find the settings on your comuter should be as in attachment_1. 2. ensure that the plc connection in ON from CNC. Attachmentattach_1.pdf (850 Downloads) |
3/17/2009 9:36 PM | |
Posts: 433 Rating: (48) |
Hi is_razi, did you contact your local siemens sales partner regarding your question? Tomcat |
3/17/2009 10:28 PM | |
Joined: 3/13/2009 Last visit: 4/25/2024 Posts: 131 Rating: (1) |
thanks to your gidances i have solved the problem. |
1/6/2011 2:54 AM | |
Posts: 2964 Rating: (478)
|
Hello..... Could you check this link it will be useful...... /tf/WW/en/Posts/52129 yes it possible to establish in both the interface... you need to go to set PG/PC interface there you need to make the selection.....check the above link Regards, Ekalavya |
1/3/2013 6:35 PM | |
Posts: 288 Rating: (4) |
I am waiting for your help.
|
1/6/2013 5:10 PM | |
Joined: 11/26/2006 Last visit: 3/13/2024 Posts: 36 Rating: (5) |
Same problem today with V3.1 Programming Tool PLC802,and fresh installation of WIN7.I have installed TIA portal V11 too.And after one day trying and mistakes, the solution is- Open regedit,and merge/802.reg/ This file adds PLC802(PPI) to thelistof installed protocols.And then,same procedure with / progtool.reg / ,which is added protocol to Progtool. I hope this help. AttachmentDesktop.zip (447 Downloads) |
This contribution was helpful to1 thankful Users |
10/16/2013 7:27 AM | |
Joined: 2/26/2010 Last visit: 11/1/2023 Posts: 4 Rating: (0) |
I was having the same problem as many of the previous posters. Windows 7 I think is the common issue here Every time I tried to choose the communications device it would automatically fill the 'choice' list but 802D(PPI) was not there Trying to add the 802D(PPI) option resulted in a request from the UAC but did not add the 802D(PPI) option to the list of installed devices. A previous poster hinted ata solution. I extracted the 802D(PPI) registry entry device from a working WIN XP installation after loading PLC PROGRAMMING TOOL and selecting Communications from the Navigator tool bar, then double clicking the coms device it auto loaded all the options. I then double clicked this .reg file (inzip archive) which added the 802D(PPI) option into the list of installed options Chose my baud rate and of I went. If I subsiquentlytried to edit the communications device again It lost the 802D(PPI) option (so don't change it) I think the error must be caused by a problem during the installation of the software not setting a flag telling the program it has already configured the communications device if some one finds a way to stop the auto populate devices option please tell me. Attachment802D(PPI).zip (593 Downloads) |
Last edited by: AndyJones at: 10/16/2013 7:48 AMLast edited by: AndyJones at: 10/16/2013 7:44 AMspelling errors and addendum |
|
This contribution was helpful to2 thankful Users |
1/8/2018 11:56 AM | |
Posts: 4 Rating: (0) |
thank you sir, i got PLC802PPI now in ProgTool, |
Follow us on