Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

printer about s7-1500

Created by: Gone with the wind at: 7/7/2016 4:03 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

7/7/2016 4:03 PM	Rate (0)
Gone with the wind Regular Member Joined: 10/10/2013 Last visit: 9/17/2020 Posts: 11 Rating: (0)	hello! everyone! I have a question about S7-1500. the ethernet interface of S7-1500 can be connected to the printer directly??? the printer provide ISO ON TCP

Suggestion To thank Quote Answer

7/7/2016 5:23 PM	Rate (0)
Duris_I Platinum Member Joined: 4/28/2015 Last visit: 3/1/2021 Posts: 7565 Rating: (607)	Hello, in this case YES. Also if printer support serial port (RS-232) or Ethernet with TCP/IP protocol, you can attach your port to printer and send needed frames to printer. Look to printer documentation how to print frames to it. can you post printer type? Pls delete all your same posts, you simply need one right?
	Last edited by: Duris_I at: 7/7/2016 5:25:42 PM Last edited by: Duris_I at: 7/7/2016 5:26:42 PM With kind regards... Duris_I
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mindware

7/8/2016 2:31 AM	Rate (0)
Gone with the wind Regular Member Joined: 10/10/2013 Last visit: 9/17/2020 Posts: 11 Rating: (0)	thanks,it is my fault. I will delete them. PLS the administrator help me delete them .I am very sorry!!
	Last edited by: Gone with the wind at: 7/8/2016 2:37:30 AM Last edited by: Gone with the wind at: 7/8/2016 2:38:10 AM
Suggestion To thank Quote Answer

7/8/2016 9:24 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 3/1/2021 Posts: 2674 Rating: (343)	Hi, yes you can connect directly to printer over integrated PN interface of you PLC. You have to work with TCON, TSEND/TSEND_C and so on. Here is an example for communication between two s7-1500. https://support.industry.siemens.com/cs/ww/en/view/58875807 Regards, Towome
	If my post was useful, please rate me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on