Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problème de connexion entre Wincc flexible et PLCSIM

Created by: RATA01 at: 9/26/2018 8:13 AM (21 Replies)

Rating (1)

Thanks 2

Result pages:: |; 1 | 2 | 3; |

22 Entries

Entries per page: 10 | 20 | all

9/26/2018 8:13 AM	Rate (0)
RATA01 Posts: 14 Rating: (0)	Bonjour à tous! J'ai un gros problème de connexion entre WinCC et PLCSIM de STEP 7 La puputre opérateur et la station (dans la fonction "Liaison") ne veut pas le connecté . Ainsi quand je lance le Runtime de Wincc et que je clic sur un bouton (exemple : Démarrer) , rien ne se passe dans la simulation de SIMATIC STEP7 (PLCSIM) S'il vous plait , pourriez vous m'aider à résoudre ce problème .. merci Hello everyone! I have a big connection problem between WinCC and PLCSIM from STEP 7 The HMI device and the station (in the "Link" function) do not want the connected. So when I run the Wincc Runtime and I click a button (example: Start), nothing happens in the simulation of SIMATIC STEP7 (PLCSIM) Please, can you help me to solve this problem?
RATA01 Posts: 14 Rating: (0)	Last edited by: RATA01 at: 9/26/2018 8:25:32 AM Last edited by: RATA01 at: 9/26/2018 8:26:37 AM
Suggestion To thank Quote Answer

9/26/2018 8:57 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 3/2/2021 Posts: 7953 Rating: (1003)	Hello, Please check the PG/PC interface in the control panel of your PC. Where is 'Step 7 Online' connected to? Best regards, Wizard

Suggestion To thank Quote Answer

9/26/2018 9:05 AM	Rate (0)
RATA01 Posts: 14 Rating: (0)	Step 7 online is connected to PLCSIM (TCP / IP)
RATA01 Posts: 14 Rating: (0)	Last edited by: RATA01 at: 9/26/2018 9:06:45 AM
Suggestion To thank Quote Answer

9/26/2018 10:32 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 3/2/2021 Posts: 7953 Rating: (1003)	Hello, When you have an IO Field in WinCC flexible, what value does it have? What event and tag have you programmed at the button? Best regards, Wizard

Suggestion To thank Quote Answer

9/26/2018 11:41 AM	Rate (0)
RATA01 Posts: 14 Rating: (0)	the start button is set to mode bitsposition to help you understand my problem, here are some pictures Attachment IMG_20180926_122425.JPG (33 Downloads)
RATA01 Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

9/26/2018 11:42 AM	Rate (0)
RATA01 Posts: 14 Rating: (0)	Attachment IMG_20180926_122451.JPG (26 Downloads)
RATA01 Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

9/26/2018 11:50 AM	Rate (0)
RATA01 Posts: 14 Rating: (0)	here is the whole picture Attachment FB_IMG_15379546173486999.jpg (18 Downloads)
RATA01 Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

9/26/2018 1:50 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 3/2/2021 Posts: 7953 Rating: (1003)	Hello, Go to PG/PC interface in the control panel of your PC. Change the connection for 'S7Online' to PLCSIM (MPI) And in NETPRO (configure networks) make sure both CPU and PC are connected to MPI network Best regards, Wizard
	Last edited by: Wizard at: 9/26/2018 1:52:03 PM
Suggestion To thank Quote Answer

9/27/2018 8:42 AM	Rate (0)
RATA01 Posts: 14 Rating: (0)	the MPI configuration could not work correctly, please send me another configuration (example: TCP / IP or PROFIBUS or other) and guided me step by step in the connection between STEP 7, Wincc flexible and PLCSM I use a CPU 315 DN/DP for the PLC S7-300 Thank you very much
RATA01 Posts: 14 Rating: (0)	Last edited by: RATA01 at: 9/27/2018 8:44:43 AM
Suggestion To thank Quote Answer

9/27/2018 9:18 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 3/2/2021 Posts: 7953 Rating: (1003)	Hello, Please have a look at the following link: How do you configure a connection between WinCC flexible Runtime (PC/Panel) and a SIMATIC S7-300/S7400 via PROFIBUS/MPI? Or How do you configure a connection between WinCC flexible Runtime (PC or Panel) and a SIMATIC S7-300 / S7-400 via Industrial Ethernet? When you want to use PLCSim, you need to set PG/PC interface to the right communication PLCSim (TCP/IP if you use Ethernet and PLCSim (MPI) if you use MPI Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on