7/6/2009 9:34 AM | |
Joined: 10/7/2005 Last visit: 4/18/2024 Posts: 3003 Rating: (1046) |
Hello KOURTZAAR have a look at this FAQ whichI hope will help. |
Cheers |
|
7/6/2009 10:31 AM | |
Joined: 10/7/2005 Last visit: 4/18/2024 Posts: 3003 Rating: (1046) |
Hello again, it's always reccomended to go for the latest firmware (V5.3 in your case) which you'll find here: Firmware Updates for S7-416-CPUs Please note that it is easy to pick the wrong CPU in the list, make sure to read the part numbers carefully andto download the correct firmware. A firware update will also fully "reset" you CPU to factory default (i.e the online SDB will be gone) HWconfig V5.1 is by the way the one to use for firmware V5.1.0 (Siemens sometimes doesminor firmware upgrades such as V5.1.1 in which case you'll still use V5.1 from the HWconfig catalogue). P.S: Which Step7 version are you using? |
Last edited by: fritz at: 7/6/2009 10:33 AMCheers |
|
7/6/2009 11:18 AM | |
Joined: 10/7/2005 Last visit: 4/18/2024 Posts: 3003 Rating: (1046) |
Have another look at the firmware link that I gave you, as of firmware V5.0 you can also do an online firmware update (no need for a flash Eprom card). |
Cheers |
|
7/6/2009 1:59 PM | |
Posts: 48 Rating: (1) |
Hello mumbles, i find it very useful and i use this in future.Thank you very match. |
7/7/2009 12:07 AM | |
Joined: 10/7/2005 Last visit: 4/18/2024 Posts: 3003 Rating: (1046) |
Netpro's "main job" is for configuring communication connections, you typically do not want to "clutter" your Netpro screen with DP Slaves (it is HWconfig's "job" to configure these). If you do however want to see DP Slaves in Netpro you'll need to go to the <View> menu and select <With DP Slaves / IO Devices> (so this couldn't be the cause of your problem, I'm still glad you solved it somehow though). |
Last edited by: fritz at: 07.07.2009 01:26Cheers |
|
8/4/2011 9:29 AM | |
Posts: 69 Rating: (0) |
I deleted SDBs many time! but I don't think I did that online! I have to be online with CPU then do that? Moreover, I did the compile from Simatic Manager! |
8/4/2011 9:54 AM | |
Joined: 3/21/2006 Last visit: 4/4/2024 Posts: 10228 Rating: (1181) |
At least you could try it. What happens if you remove the new added module and tried to download the "old" hardware configuration? Try to put there some other module (non physically existing with you) and try to download it. http://support.automation.siemens.com/WW/view/en/8686578 Best regards, Hristo Mihalev |
Follow us on