11/13/2018 9:21 AM | |
Posts: 18 Rating: (0) |
I don't sure. How can I do that? (I uploaded picture of these values) |
Last edited by: ИванИван777 at: 11/13/2018 9:40:51 AM |
|
11/13/2018 11:34 AM | |
Joined: 12/16/2012 Last visit: 4/15/2024 Posts: 651 Rating: (129) |
Hi, Retain is set on the PLC side, in your case e.g. for BF-10-1 in DB43. |
11/14/2018 10:31 AM | |
Posts: 18 Rating: (0) |
Can you to describe this moment in more detail? |
11/14/2018 2:01 PM | |
Joined: 12/16/2012 Last visit: 4/15/2024 Posts: 651 Rating: (129) |
Hi! If you use TIA portal for the PLC project, check this: https://support.industry.siemens.com/cs/ww/en/view/109755202/90270228619 In the case of classic S7, you can set the retentivity of the whole DB. |
Last edited by: Jen_Moderator at: 11/14/2018 2:12:19 PMOptimized link. |
|
11/15/2018 5:45 AM | |
Posts: 18 Rating: (0) |
Hi! Where exactly?? It's not global data, these data from modbus. |
11/15/2018 12:12 PM | |
Posts: 18 Rating: (0) |
Ok! I did it. But what is next? I don't see DB43. |
11/15/2018 12:13 PM | |
Posts: 18 Rating: (0) |
One more. |
11/15/2018 1:27 PM | |
Joined: 12/16/2012 Last visit: 4/15/2024 Posts: 651 Rating: (129) |
Hi! There is an S7-1215C PLC with IP address 192.168.0.16 somewhere in your plant. |
11/21/2018 12:48 PM | |
Joined: 12/16/2012 Last visit: 4/15/2024 Posts: 651 Rating: (129) |
|
Last edited by: Kahl at: 11/21/2018 12:49:06 PM |
|
12/14/2018 11:26 AM | |
Posts: 18 Rating: (0) |
Sorry for the delay. Everything is work! Thanks!!! |
This contribution was helpful to1 thankful Users |
Follow us on