Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

profibus communication between diris a40 and cpu 416

Created by: AutoGen_317120 at: 11/18/2013 7:43 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/18/2013 7:43 AM	Rate (0)
AutoGen_317120 Posts: 1 Rating: (0)	Hi I want to communicate between diris A40 and CPU416-3DP. in Local i have COM and Profibus card Installed on Diris A40.2 dip switches are on.and Address set in 16,diag yes and para yes. in Cpu hardware i installed DIRI0948.gsd and inserted in profibus master line with address 16 and configure it.and principle value module inserted it. but after download i haven,t communication. How do i do?
AutoGen_317120 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/24/2014 8:24 PM	Rate (0)
Georgio Bronze Member Joined: 10/28/2008 Last visit: 12/2/2019 Posts: 243 Rating: (14)	It is very difficult to answer, there can be more problems. As I posted more times, you should you profibus analyser to see traffic on your profibus network. Georgio
	Georgio
Suggestion To thank Quote Answer

9/19/2017 7:52 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 1/20/2021 Posts: 4427 Rating: (73)	New question published by varunbiju is split to a separate thread with the subject Communicate 2 energy meter Master and Slave Diris A40. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on