Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Read diagnostic info

Created by: v.kerstholt at: 11/13/2013 7:57 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/13/2013 7:57 AM	Rate (0)
v.kerstholt Advanced Member Joined: 9/3/2013 Last visit: 10/6/2020 Posts: 58 Rating: (8)	i used to do: [code] #iReturn := RDSYSST(REQ := true // IN: BOOL ,SZL_ID := 16#94 // IN: WORD ,INDEX := #wMasterSystem // IN: WORD ,BUSY := #bBusy // OUT: BOOL ,SZL_HEADER := #SSL_HEADER // OUT: STRUCT ,DR := #udtBusDiag.wConfig // OUT: ANY ); // INT [/code] to read oud the diagnose of my profinet/profibus Hardware. i now need to do this with GET_DIAG. but there i only can read out one of the hardeware components. How to migrate this function?

Suggestion To thank

11/13/2013 8:23 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/2/2021 Posts: 2694 Rating: (135)	Thread closed, because question is already published in the following thread Read system status list Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on