5/19/2011 10:07 AM | |
Joined: 5/11/2011 Last visit: 8/10/2021 Posts: 23 Rating: (0) |
Hi Ekalavya , |
5/19/2011 10:10 AM | |
Posts: 2964 Rating: (478) |
Hello... Think so.... Module looks to be different.... Regards, Ekalavya |
5/19/2011 10:14 AM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello, Check there - SIMATIC S7-300 S7-300 Automation System Module Data. Replace the modules in hardware configurator, make new wiring according to the manual and that's it. Best regards, Hristo Mihalev |
5/19/2011 10:25 AM | |
Joined: 5/11/2011 Last visit: 8/10/2021 Posts: 23 Rating: (0) |
Hi , I checked the module data . but the module (6ES7 331 1KF01 0AB0) is not given in the manual . |
5/19/2011 3:26 PM | |
Joined: 4/22/2010 Last visit: 2/15/2024 Posts: 5697 Rating: (711) |
Attached you find the 1KF01 data. Best regards, Marcjan Attachment1kf01.pdf (282 Downloads) |
Problem solved? |
|
9/25/2014 6:30 AM | |
Posts: 18 Rating: (0) |
Hello guys, I want to replace the old module 6ES7331-1KF01-0AB0 with the new one 6ES7331-1KF02-0AB0.It is possible to replace without changing the hardware configuration from software,or without changing the wiring? Thanks in advance |
9/25/2014 7:00 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872) |
Yes, it can. Please read the above reply by Mr. UMENCHO |
This contribution was helpful to1 thankful Users |
2/20/2018 4:50 PM | |
Posts: 1 Rating: (0) |
The Safety switchgear 3TK 2923-0BB4 has been discontinued.. is there a replacement for this unit? Thanks Stefan |
2/20/2018 5:18 PM | |
Joined: 9/27/2006 Last visit: 4/25/2024 Posts: 12257 Rating: (2665)
|
Hello Stefan; A search for your delay-module 3TK2923-0BB4 results in the attached information. It seems that there is no direct successor product, but solutions can be proposed by Siemens personnel. See the screenshot below. Hope this helps, Daniel Chartier |
3/20/2018 12:49 PM | |
Posts: 1 Rating: (0) |
Hi all , I wanted to replace an Digitl input module (321-1BH02-0AA0) with another Digital module (321-1BH50-0AA0) . Is it possible to use the wiring of the old module in the new(replaced ) module? . IF yes , then how is the wiring done? . I could not find a manual for the module with the wiring. Thanks in advance |
Follow us on