Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 1200 PID PROBLEM

Created by: patel at: 1/7/2012 9:14 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/7/2012 9:14 AM	Rate (0)
patel Posts: 134 Rating: (2)	Hi.. I am using s7 1200 first time.soi need help in that.I am using PID_Compact intruction in it.Now in that i have used "OUTPUT" prameter in PID configuration.I dont want to use OUTPUT_PER. Now i want to know that this OUTPUT parameter will give output in 0 to 100 % form or it will give output in range of 0-27648 counts?Because this data i need to use to unscale the data in 4-20 ma signal. Thnks...
patel Posts: 134 Rating: (2)
Suggestion To thank Quote Answer

1/9/2012 5:35 PM	Rate (0)
FreakOnALeash Bronze Member Joined: 2/11/2010 Last visit: 4/20/2020 Posts: 267 Rating: (22)	Hello, you can choose between Output_PER (analog), Output and Output_PWM in the "Basic settings" of the Configuration of the PID_Compact.

Suggestion To thank Quote Answer

1/10/2012 6:07 AM	Rate (0)
patel Posts: 134 Rating: (2)	Hi.. This i already knows...i just want to know this " OUTPUT" parameter will give result in which format? whether it will be 0-100% or 0-27648 counts....
patel Posts: 134 Rating: (2)
Suggestion To thank Quote Answer

1/10/2012 9:55 AM	Rate (0)
FreakOnALeash Bronze Member Joined: 2/11/2010 Last visit: 4/20/2020 Posts: 267 Rating: (22)	The output valueis percentin REAL format. Attachment Output parameters of PID_Compact.pdf (206 Downloads)

Suggestion To thank Quote Answer

1/10/2012 10:39 AM	Rate (0)
patel Posts: 134 Rating: (2)	Hi.. Thnx..I got it..
patel Posts: 134 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on