Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 1500 connecting with ET 200 Sp. Error: IO device failure -

Created by: Hoa215244276 at: 4/22/2016 11:23 AM (17 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

18 Entries

Entries per page: 10 | all

4/23/2016 5:50 PM	Rate (0)
Hoa215244276 Advanced Member Joined: 1/14/2015 Last visit: 6/24/2019 Posts: 19 Rating: (0)	The real firmware of hardware and tia project is the same. It is version 3.0. Please checking help me project. The configuration is correct, isn't it? Thanks

Suggestion To thank Quote Answer

4/24/2016 9:26 AM	Rate (0)
Davinator Silver Member Joined: 1/4/2013 Last visit: 11/9/2019 Posts: 784 Rating: (57)	We already knew about that error ... Click on it , and show on bottom the detailed descriptions. Are you using plc in io device mode ? If yes post the settings
	ChristophD supporter !
Suggestion To thank Quote Answer

4/24/2016 9:46 AM	Rate (0)
Hoa215244276 Advanced Member Joined: 1/14/2015 Last visit: 6/24/2019 Posts: 19 Rating: (0)	Hi Davinator! Please to explain clearly. I don't understand your idea. How i need setting? i need to use the io device mode in plc and et200sp station.Thanks Attachment Stu.PNG (209 Downloads)
	Last edited by: Hoa215244276 at: 4/24/2016 9:47:45 AM Last edited by: Hoa215244276 at: 4/24/2016 9:59:32 AM Last edited by: Hoa215244276 at: 4/24/2016 10:09:04 AM Last edited by: Hoa215244276 at: 4/25/2016 6:23:04 AM
Suggestion To thank Quote Answer

4/25/2016 2:23 AM
Hoa215244276 Advanced Member Joined: 1/14/2015 Last visit: 6/24/2019 Posts: 19 Rating: (0)	Please help me

Suggestion Quote Answer

4/25/2016 6:18 AM	Rate (0)
ChristophD Diamond Member Joined: 5/12/2006 Last visit: 11/14/2019 Posts: 16890 Rating: (2013)	Hello, you should click on the Error entry "IO Device Failure" to get the exact information for the Error. Have you check that the ET200 have the correct DP Address ? Have you plug the Servermodule at the end of the Et200? Have you the same basemodule for the I/O like projected in HWCOnfig? Regards Christoph

Suggestion To thank Quote Answer

4/25/2016 6:25 AM	Rate (0)
Hoa215244276 Advanced Member Joined: 1/14/2015 Last visit: 6/24/2019 Posts: 19 Rating: (0)	here Error of the systerm. i can't connect with ET200 SP. Attachment Stu.PNG (173 Downloads)

Suggestion To thank Quote Answer

4/25/2016 7:06 AM	Rate (0)
ChristophD Diamond Member Joined: 5/12/2006 Last visit: 11/14/2019 Posts: 16890 Rating: (2013)	Hello, better you read exactly which information we need! We don't need the Summary Diagnostic! Open the diagnostic buffer of the PLC select the entry "I/O Device Failure" and show the detailed information! Have you check the points from my last post?` Regards Christoph

Suggestion To thank Quote Answer

4/25/2016 6:38 PM	Rate (0)
Hoa215244276 Advanced Member Joined: 1/14/2015 Last visit: 6/24/2019 Posts: 19 Rating: (0)	HI ChristophD! I attach the information of diagnostics buffer . please see error and help me problem solving Attachment buffer.PNG (253 Downloads)

Suggestion To thank Quote Answer

| |

Follow us on