Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 node for writing

Created by: iot.jp at: 8/8/2017 6:52 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

8/8/2017 6:52 AM	Rate (0)
iot.jp Regular Member Joined: 5/8/2017 Last visit: 11/21/2019 Posts: 21 Rating: (0)	Hi, I have a question for writing data to PLC via S7 connection. IOT2040 is connecting with S7-1200 and panel. IP address and the setting are maybe correct. But analog data cannot display on the panel. S7-1200 and panel are connecting correctly, so maybe there is a problem between IOT2040 and S7-1200. Could you knindly tell me the solution? Thanks for your help. Attachment Structure.zip (79 Downloads)

Suggestion To thank Quote Answer

8/8/2017 8:23 AM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 12/10/2019 Posts: 1221 Rating: (197)	Hi, are there any error messages in Node-RED? In your Node-RED screenshot it looks like the value is written correctly. Can you please provide your Node-RED flow? Go to the menu bar in the right top corner --> Export --> Clipboard and then copy the content in a .txt file and post it here. This makes it easier to find an error sometimes. Best regards!

Suggestion To thank Quote Answer

8/8/2017 9:11 AM	Rate (0)
iot.jp Regular Member Joined: 5/8/2017 Last visit: 11/21/2019 Posts: 21 Rating: (0)	Thank you for your reply. I attached text file of exported JSON code. Please confirm it. Best Regards Attachment project.txt (68 Downloads)

Suggestion To thank Quote Answer

8/8/2017 4:51 PM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 12/10/2019 Posts: 1221 Rating: (197)	I tested this flow and I have the same problem. Node-RED shows the correct values but they aren't written to the PLC. It looks like that the function nodes together with the S7-node are leading into problems. I think that the functions are too slow for the S7 node. If I am deleting the function nodes, the transfer to the PLC works. If I am using OPC UA nodes instead of S7 it works (I know S7-1200 doesn't have an OPC UA server, but this was just for testing; I am using a S7-1500). I was playing around with timeout and cycletime time of the S7 node, but I didn't have success together with the function nodes.. Does anybody have experience using function nodes and S7 node together? Best regards!

Suggestion To thank Quote Answer

9/7/2017 8:23 AM	Rate (0)
The Helping Hand Moderator Joined: 8/21/2014 Last visit: 12/10/2019 Posts: 563 Rating: (12)	New question published by Piet.pol is split to a separate thread with the subject is there a node-red module for writing data to a S7 PLC ?. Best regards The Helping Hand

Suggestion To thank Quote Answer

9/21/2017 5:05 AM	Rate (0)
iot.jp Regular Member Joined: 5/8/2017 Last visit: 11/21/2019 Posts: 21 Rating: (0)	Thanks for your reply. I comfirmed OPC-UA conection with S7-1500. Anyway, S7 writing function is updated? or the problem was solved? The function is absolutely needed for connecting between node-red and PLC in the future. then this is truly "connectivity",right? Would you kindly tell me the answer? Best Regards

Suggestion To thank Quote Answer

10/1/2019 2:57 PM	Rate (0)
AutoGen_5471401 Member Joined: 3/11/2016 Last visit: 12/11/2019 Posts: 1 Rating: (0)	I have similar problem, node-red output node s7 works fine but for some reasons it stops working, meanwhile, input nodes still working, has anyone find a solution? best regards.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2000 Software

Follow us on