Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 PLC Link with RCB: PPX500-2114 Module

Created by: faming at: 7/27/2011 3:23 AM (1 Replies)

Rating (0)

Thanks 2

2 Entries

7/27/2011 3:23 AM	Rate (0)
faming Advanced Member Joined: 6/8/2007 Last visit: 9/26/2019 Posts: 41 Rating: (1)	Hi Due to on site time schedule. Befroe the TI system totally migrate to S7 PLC, Is there any possible to Use S7 PLC module Link with TI RCB Module: PPX500-2114 to control original I/O module under of it and what should we know ?

Suggestion To thank Quote Answer

7/27/2011 11:20 AM	Rate (0)
SamTheEagle Experienced Expert Joined: 2/10/2006 Last visit: 11/13/2019 Posts: 112 Rating: (10)	Hi Faming, No, it is not possible to connect Series 500 I/O to an S7 PLC with the 500-2114 RBC. There are some possibilities based on Profibus: you could use the old 500-6870 Profibus RBC (probably hard to find) ; plug in directly in the series 500 base you could use the Siemens 505-6870 or CTI 2500-RBC. In this case you would need to use the CTI 2500-RADP adapter to plug in a series 505 or CTI 2500 card into a series 500 base: http://www.controltechnology.com/products/2500-radp/ You will need the appropriate GSD file and configure the Series 500 I/O as Profibus I/O in the S7 CPU. I can send you the GSD files. Hope this helps.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users dchartier billwest

| |

Follow us on