Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sample Configuration for ET 200B as slave on CPU 300

Created by: j3pd at: 7/13/2013 9:03 AM (21 Replies)

Rating (3)

Thanks 4

Result pages:: |; 1 | 2 | 3; |

22 Entries

Entries per page: 10 | 20 | all

7/13/2013 9:03 AM	Rate (0)
j3pd Regular Member Joined: 6/2/2013 Last visit: 12/19/2013 Posts: 30 Rating: (0)	Hi all, Anyone has sample configuration for ET 200B or similar slave device on CPU 300 on step 7 or Tia V11, im trying to configure it but i failed to do it properly. Thanks Jeff

Suggestion To thank Quote Answer

7/13/2013 9:09 AM	Rate (0)
playerslight Platinum Member Joined: 4/30/2008 Last visit: 10/2/2017 Posts: 1064 Rating: (71)	post your hardware and we will see if we can help you out
	Regards Steve Don't worry about walking a mile in my shoes Just try think for a day in my head
Suggestion To thank Quote Answer

7/13/2013 9:38 AM	Rate (1)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2019 Posts: 10197 Rating: (1148)	Try it to use search option here. Writing " S7-1200 Profibus"...

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

7/13/2013 10:13 AM	Rate (0)
j3pd Regular Member Joined: 6/2/2013 Last visit: 12/19/2013 Posts: 30 Rating: (0)	Hi all, 1. Master S7 314C-2 DP 2. 3 ET 200B 32di 3. Power Supply SITOP 24V 20 A serve as power source to the 3 ET 200B and to S7 314C-2 DP Thanks and Regards Attachment test1.jpeg (61 Downloads)

Suggestion To thank Quote Answer

7/13/2013 11:07 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 12/11/2019 Posts: 4369 Rating: (656)	Hi Jeff, The ET 200B they you've already configured as 4,5,6 if you click on the station, then you will have the DI addresses, or what do you do?
	Last edited by: Ste39 at: 7/13/2013 11:07 AM
Suggestion To thank Quote Answer

7/13/2013 11:17 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 12/16/2019 Posts: 4152 Rating: (773)	Dear j3pd, Do you remember this thread: Simatic s7 300 with ET 200 B (Profibus network) and TIA V11
	Ayman Elotaify MISC Egypt www.miscegypt.com
Suggestion To thank Quote Answer

7/13/2013 11:45 AM	Rate (0)
j3pd Regular Member Joined: 6/2/2013 Last visit: 12/19/2013 Posts: 30 Rating: (0)	Hi ayamn, yeah i always visit it, but still cannot communicate properly, Hi Ste39, yah there is 32di 4 bytes Input 0..3, should I also add Ouput?, the only choice is to add 32Do inorder to have Output, If I add Do it will look like below attachment. see attached document Attachment test2.jpg (42 Downloads)

Suggestion To thank Quote Answer

7/13/2013 11:51 AM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 12/16/2019 Posts: 4152 Rating: (773)	j3pd Hi ayamn, yeah i always visit it, but still cannot communicate properly, Hi Ste39, yah there is 32di 4 bytes Input 0..3, should I also add Ouput?, the only choice is to add 32Do inorder to have Output, If I add Do it will look like below attachment. see attached document Hello, Do you want to program it using STEP7 or Step 7 TIA?
	Ayman Elotaify MISC Egypt www.miscegypt.com
Suggestion To thank Quote Answer

7/13/2013 11:51 AM	Rate (0)
j3pd Regular Member Joined: 6/2/2013 Last visit: 12/19/2013 Posts: 30 Rating: (0)	When you add the GSD file for ET 200B is it automatically addressed? Do i need to configure the hex parameters for each station? link for address ET200B /tf/WW/en/Posts/50617 What i read is that its not necessarily to configure the hex parameters since its automatically address but i have doubt of finding the right station. example ET 200B Station 1, Station 2, Station 3. correct and guide me thanks jeff

Suggestion To thank Quote Answer

7/13/2013 11:53 AM	Rate (0)
j3pd Regular Member Joined: 6/2/2013 Last visit: 12/19/2013 Posts: 30 Rating: (0)	I try it to Step 7 and also in Tia V11, but seems still i cannot progress.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on