Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Scale Analog input

Created by: borg112 at: 2/3/2014 3:57 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/3/2014 3:57 PM	Rate (0)
borg112 Advanced Member Joined: 12/11/2013 Last visit: 3/1/2019 Posts: 15 Rating: (0)	HI, As I can´t find any pressure transmitters for my low budget air ride project will I ask for some inputs. Is it best to use 4-20 ma transmitters and convert them with a resistor into my 0BA7 logo or go with a 1-5v transmitter and try to scale it right. My pressure range will be 0-145psi (10bar). Thanks Stefan

Suggestion To thank Quote Answer

2/3/2014 5:02 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 8/22/2019 Posts: 5564 Rating: (659)	Hello, Best option would be an analog extension module. But for low budget project, the resistor option would be best. That willcreate a 2-10V input signal. For Scaling see: How do you scale measured values in LOGO! Soft Comfort? Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

2/9/2014 6:05 PM	Rate (0)
Betel Platinum Member Joined: 1/5/2007 Last visit: 11/30/2016 Posts: 1654 Rating: (549)	Hello, please look at my answerts at the following links: Scaling question - pressure sensor Scaling Question Best regards Betel
	==> Meine TAG-Listen: "deut." ==> "Meine EXCEL-Tools" ==> "Sammlung von Hinweisen und Schaltungen zur Programmierung der LOGO!" ==> "Konzepte + Schaltungen einer Mischeransteuerung (PD-3-Punkt-Schritt-Regelung)" ==> mein Entwurf: "LogoLogger2_Test_3" ==> "LOGO! 0BA7-Erstes Feedback an die LOGO!-Entwickler"
Suggestion To thank Quote Answer

6/12/2014 10:44 AM	Rate (0)
Narrator1 Bronze Member Joined: 3/25/2013 Last visit: 3/21/2019 Posts: 187 Rating: (1)	Question split intolooking for siemens PG710. With best regards, Narrator1

Suggestion To thank Quote Answer

| |

Related topics by keywords:

Follow us on