_setmaster..

Hello experts

       when i use a gear synchronazation.  first ,i need to use _enableaxis on master and slave axis.

and then use _enablegearing command. Sometimes if i switch the master value ,i need to use _setmaster.

       My question: i need to use _enablegering firest or ues _setmaster first?

       thank you very much

      Winter

Jeff Casagrande

_Setmaster.  The gear function needs to know what master it is using.

thank you .

you mean  if use _enablegearing   have to use _setmaster first?

sorry ,another question about _setmaster.

there is a parameter "tranientBehavior" if set "WITH_NEXT_SYNCHRONIZIN"

is that means :the master value will not switch until the next _enablegearing actived again?

Thank you

Winter

The two are independent. 

When the gear command is executed, it will use whatever master is set.

Jeff Casagrande

The two are independent. 

When the gear command is executed, it will use whatever master is set.

 thank you for your answer .

 Now ,after reading the manual , i think when there is only a master for the following axis, just use _enablegearing  or _mc_gearin.If ,there is more than one master for the following ,before the  enablegearing ,i need to setmaster first.

jacek d

Not being 100% sure, but I think that even when there's only one master for a following axis if you don't use at least once _setmaster explicitly then the sync master will point to TO#NIL and gearing command will fail.

 thank you very much !

Jeff Casagrande

You may be correct, but I remember reading in the manual that a master will be selected at random at startup.  That implies that if there is one master, then the configured master will always be selected.  I always have two with my applications, one virtual for simulation and one external encoder for real operation, so I always explicitly select the real axis as master in a startup task. 

 thank you very much!