Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sick DL100 Interface with S7 1214

Created by: riteshk at: 1/22/2021 5:11 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

1/22/2021 5:11 PM	Rate (0)
riteshk Member Joined: 8/9/2019 Last visit: 1/23/2021 Posts: 3 Rating: (0)	I am Interfacing a Sick DL100 Profinet laser distance sensor with my S71214 CPU. Have configured the Laser in PLC, I can see the laser and its details when i scan the network card. But unable to fetch any data from laser. Error IO Device Failure-Differing device type. Can some body guide me on this. The indicators on laser say Master PLC cannot be reached. Attachment 41.PNG (7 Downloads)

Suggestion To thank Quote Answer

1/22/2021 5:12 PM	Rate (0)
riteshk Member Joined: 8/9/2019 Last visit: 1/23/2021 Posts: 3 Rating: (0)	one more screen shot Attachment 42.PNG (7 Downloads)

Suggestion To thank Quote Answer

1/22/2021 5:40 PM	Rate (0)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 3/1/2021 Posts: 10187 Rating: (1694)	That means you have the wrong GSDML, or have selected the wrong version. In #42, it shows GSDML v2.33 for DL100-2xxxxx212 and DL100-2xxxx213. Do you have either of them, and if so, do they have PN firmware 2.33 installed? riteshk I am Interfacing a Sick DL100 Profinet laser distance sensor with my S71214 CPU. Have configured the Laser in PLC, I can see the laser and its details when i scan the network card. But unable to fetch any data from laser. Error IO Device Failure-Differing device type. Can some body guide me on this. The indicators on laser say Master PLC cannot be reached.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users riteshk

1/23/2021 9:57 AM	Rate (0)
riteshk Member Joined: 8/9/2019 Last visit: 1/23/2021 Posts: 3 Rating: (0)	Thank you, that helped, i downloaded another GSD file from Sick website, it is V2.25 that worked

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on