Skip to Content

support.automation.siemens.com | Technical Forum | Saturday, December 14, 2019 8:15:35 PM

SIMATIC panel (TP) with Modbus protocol

Created by: m_anwar_alam at: 4/24/2008 2:38 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/24/2008 2:38 PM	Rate (0)
m_anwar_alam Member Joined: 3/31/2008 Last visit: 1/31/2009 Posts: 3 Rating: (0)	Dear all, can anyone advise me if i can linke a SIMATIC panel TP with a Telemecanique PLC via Modbus protocol? And if yes, will i need any special adapter or not?

Suggestion To thank Quote Answer

4/24/2008 3:20 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/13/2019 Posts: 7442 Rating: (893)	Hi, There are some options, please have a look at following manual: http://support.automation.siemens.com/WW/view/en/18797249 Chapter 6 Best regards, Wizard

Suggestion To thank Quote Answer

4/24/2008 3:45 PM	Rate (0)
aikona Silver Member Joined: 11/9/2005 Last visit: 7/25/2019 Posts: 487 Rating: (35)	Hi The only thing I can find is with protool via Telway Eric
	Here we only work on 'no need to know basis' ,just fix whatever is wrong
Suggestion To thank Quote Answer