Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

simotion d 425 not ready

Created by: mnada at: 1/30/2016 12:13 AM (31 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2 | 3 | 4; |

32 Entries

Entries per page: 10 | 20 | all

2/5/2016 7:50 PM	Rate (0)
mnada Experienced Member Joined: 8/29/2010 Last visit: 3/31/2021 Posts: 76 Rating: (0)	I format the new cf flash and upload the that have the backup, and power on recognocy topology and in sinamics copy ram to rom due to dont have the program a can change ofline the drive and download because show me error, ( I go before online and download drive to pg and save config) , In adittion I made from cu change the p10 and later config auto form sinamics integrated and parameter 948 =3 detect auto and commision and save ram to rom. everthing is ok, parametr 640 in drive change manual because show fault for change power module and in p10 in cu_003 change to comission to ready (0) , all working machine ok, But when begin the move the machine shot fault 1912 Profibus clock-sichronous operation sign of-life failure some change in profibus sinamics integrated and go fault, some advice? thanks in advance Attachment fault_2.jpg (90 Downloads)
	Last edited by: mnada at: 2/5/2016 7:54:35 PM Last edited by: mnada at: 2/5/2016 7:57:41 PM Last edited by: mnada at: 2/5/2016 10:12:38 PM Last edited by: mnada at: 2/5/2016 10:28:55 PM Last edited by: mnada at: 2/10/2016 9:39:55 PM
Suggestion To thank Quote Answer

2/10/2016 11:18 PM	Rate (0)
mnada Experienced Member Joined: 8/29/2010 Last visit: 3/31/2021 Posts: 76 Rating: (0)	the manual said i could desability, that is allowed I mean If change the value p925 now in 1 to 65535 that is allowed and work ok? F01912 bus cycle time to short Attachment ff22.jpg (64 Downloads)
	Last edited by: mnada at: 2/10/2016 11:37:58 PM Last edited by: mnada at: 2/10/2016 11:40:22 PM
Suggestion To thank Quote Answer

2/11/2016 4:40 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/16/2021 Posts: 18965 Rating: (2373)	Hello, F01902 doesn't mean "bus cylce to short", this error mean that the Lifesign between Simotion and Sinamics have the wrong cycle! If you start the move and the fault occurs which operation state have the Simotion? This fault can happens if a error occurrs and Simotion go to STOP. If the SIMOTION is in STOP then check the Diagnostic buffer why the SIMOTION is going to STOP. At the moment is not really clear for me what you do exactly. You wrote a lot of things what you do but nothing of this actions is really clear to me. You wrote from a download, then Auto Commissioning, then Upload, you talk about a r0948 which only display the time when a fault occurrs (nothing with auto and commissioning): Which error occurrs that you change the p640? I think in the moment you have no valid configuration loaded and the comunication between SIMOTION and SINAMICS is not correct. Regards Christoph
	Last edited by: ChristophD at: 2/11/2016 4:41:51 AM
Suggestion To thank Quote Answer

2/11/2016 12:20 PM	Rate (0)
mnada Experienced Member Joined: 8/29/2010 Last visit: 3/31/2021 Posts: 76 Rating: (0)	sorry I wrote wrong not r0948 I mean 9906=3 and 9908= 2 then with p=2 then detect toplogy and compare component class in online sinamics intregrated, and config topology, copy ram to rom, but in diagnostic buffer only show was stop for f1910 and f1912 before show in power module waiting because in parameter list in drive p=2 and r200 show=10013 and need to change manual r201 =10012 to 10013. when I move manual this parameter r210 allowed for p=0 ready in drive parameter I agree with I have some wrong in config communication between simotion and sinamics but I cant see where thanks for you response
	Last edited by: mnada at: 2/11/2016 12:23:49 PM Last edited by: mnada at: 2/11/2016 12:25:20 PM
Suggestion To thank Quote Answer

2/11/2016 12:44 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/16/2021 Posts: 18965 Rating: (2373)	Hi, please post the conmplete diagnostic buffer here from SIMOTION and SINAMICS. And provide Screens : Alarmlist (complete) when the error is present Diagnostic windows (complete) when the error is present. Regards Christoph

Suggestion To thank Quote Answer

2/11/2016 3:25 PM	Rate (0)
mnada Experienced Member Joined: 8/29/2010 Last visit: 3/31/2021 Posts: 76 Rating: (0)	up load diagnnostic device and faults Attachment Lenci 2.zip (39 Downloads)

Suggestion To thank Quote Answer

2/11/2016 3:56 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/16/2021 Posts: 18965 Rating: (2373)	Event details: 5 of 100 : 01:04:02:581 15.07.94 Event ID: 16# F360:BE06 Additional information 4 / 5: 16# C4 50 Additional information 1 / 2 / 3: 16# 7106 0000 000E STOP por sistema de ejecución, causa: falta un programa de la Task ExecutionFaultTask Incoming event ................................................................................ Event details: 6 of 100 : 01:04:02:581 15.07.94 Event ID: 16# F360:BF8D Additional information 4 / 5: 16# 00 00 Additional information 1 / 2 / 3: 16# 0000 0000 3951 Floating-Point-Exception en el programa de usuario Error 11130 {TASK-ID: 16}, gstnst, line {ASM: 0x21}: FPU exception Incoming event This is a error which cause a PLC Stop and can be the reason for the f01910. Why the diagnostic buffer is from 1994 and in the screen the date is 2016? Regards Christoph

Suggestion To thank Quote Answer

2/11/2016 4:15 PM	Rate (0)
mnada Experienced Member Joined: 8/29/2010 Last visit: 3/31/2021 Posts: 76 Rating: (0)	If I undestand one task go to fault or stop and maybe it was ascociate the old drive that was replaced, I didnt see the time before, go to stop because dont find the task..........
	Last edited by: mnada at: 2/11/2016 4:26:18 PM
Suggestion To thank Quote Answer

2/11/2016 4:24 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/16/2021 Posts: 18965 Rating: (2373)	Hello, no the CPU goes to stop because a program is missing for a task! You have a FPU Exception in the user prograsm, now the system would start the ExecUtionFaultTask to handle the expetion, but no program is in this task, so CPU goes to Stop. Regards Christoph

Suggestion To thank Quote Answer

3/20/2018 11:27 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 4/16/2021 Posts: 4598 Rating: (82)	New question published by Ameslar is split to a separate thread with the subject problem in one D425 CPU , it doesn't working normally . Best regards Jen_Moderator

Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

32 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on