Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simotion D410 DP and ET200M with DI/DO

Created by: akbar_torkashwand at: 9/14/2018 7:44 AM (16 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

9/14/2018 7:44 AM	Rate (0)
akbar_torkashwand Experienced Member Joined: 6/14/2015 Last visit: 3/22/2020 Posts: 104 Rating: (0)	Hello every body I have Simotion D410 DP and ET200M with DI/DO. My system is OK and work correctly. . I uploaded program from D410DP When I online with simotion my D410 detect but ET200M don't detect (Address of ET200M is 6 in profibus) also I don't know where is used I/O of ET200M in my upload program. I attached Simotion access node in online mode. Attachment Simotion.png (13 Downloads)

Suggestion To thank Quote Answer

9/14/2018 7:46 AM	Rate (0)
akbar_torkashwand Experienced Member Joined: 6/14/2015 Last visit: 3/22/2020 Posts: 104 Rating: (0)	This picture is HW configuration in online mode Attachment HW_Online Mode.png (14 Downloads)

Suggestion To thank Quote Answer

9/14/2018 8:14 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/3/2020 Posts: 17601 Rating: (2125)	Hello, accessible Nodes in Scout only show Devices which supported from Scout, this are SIMOTION CPU and SINAMICS Drives. All other bus devices (ET200, S7-PLC...)are only displayed with the node number without type informations. This is displayed in your screen. Regards Christoph

Suggestion To thank Quote Answer

9/14/2018 8:25 AM	Rate (0)
akbar_torkashwand Experienced Member Joined: 6/14/2015 Last visit: 3/22/2020 Posts: 104 Rating: (0)	Thank you for answering. How can I find ET200 I/O used in my uploaded program . I did not find ET200 I/O in my program. Is there reference data such Simatic manager in simotion software

Suggestion To thank Quote Answer

9/14/2018 8:36 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/3/2020 Posts: 17601 Rating: (2125)	Hello, check in HWConfig the IO Adress if the Et200M in SImotion Adress range. Then you can search in the project for this address. You can also open the Adresslist in Scout and lock if a Symbol is configured for the ET200 IO Adress then you can search this symbol in the project. reference data can be created/displayed in the context menu of the PLC. Regards Christoph
	Last edited by: ChristophD at: 9/14/2018 8:36:47 AM
Suggestion To thank Quote Answer

9/14/2018 9:16 AM	Rate (0)
akbar_torkashwand Experienced Member Joined: 6/14/2015 Last visit: 3/22/2020 Posts: 104 Rating: (0)	Thank you for answering my question kindly. My address list is empty. How can I find SImotion Adress range in Simotion software? Attachment ADDRESS LIST.png (16 Downloads)

Suggestion To thank Quote Answer

9/14/2018 9:36 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/3/2020 Posts: 17601 Rating: (2125)	adressrange is displayed in hwconfig,

Suggestion To thank Quote Answer

9/14/2018 10:13 AM	Rate (0)
akbar_torkashwand Experienced Member Joined: 6/14/2015 Last visit: 3/22/2020 Posts: 104 Rating: (0)	HW config in simatic manager or simotion software? Attachment HW.png (11 Downloads)

Suggestion To thank Quote Answer

9/14/2018 10:26 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/3/2020 Posts: 17601 Rating: (2125)	Hello, Simotion Scout have no HWConfig it use the one from Step7. In your pictures now you can see that the ET200 use the Adressrange I67-68/Q67-68 and I256 Now you can search in Scout for this Adresses (search in project). Or you change the Adresses in HWConfig and recompile the Scout project an see if any error reported for missing adresses. Regards Christoph

Suggestion To thank Quote Answer

9/14/2018 2:14 PM	Rate (0)
akbar_torkashwand Experienced Member Joined: 6/14/2015 Last visit: 3/22/2020 Posts: 104 Rating: (0)	I changed the Addresses in HWConfig and recompiled the Scout project. I have 3 errors in my program.(control, motion,position) I don't know why I have errors in control , motion and position program. because they haven't any code. I uploaded this project. Attachment error.png (13 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on