Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

sink type or source type

Created by: Sindhu@keas at: 5/10/2012 1:16 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

5/10/2012 1:16 PM	Rate (0)
Sindhu@keas Posts: 23 Rating: (0)	Is analog Input card 6ES7 231-4HF30-0XB0 Source type or sink type module
Sindhu@keas Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

5/10/2012 3:17 PM	Rate (0)
koenb Silver Member Joined: 6/26/2009 Last visit: 11/26/2020 Posts: 120 Rating: (19)	Hi , the inputmodile that you mentioned is a passive component , it will not deliver power to your sensor. If you want to connect a 2-wire currentloop , the sensor has to be feed from a seperate power-supply. In your words it is a Sink type.

Suggestion To thank Quote Answer

5/10/2012 3:43 PM	Rate (0)
Sindhu@keas Posts: 23 Rating: (0)	We are using a barrier at the input side and the wiring module is attached.The barrier isalso Sink type . Attachment sink type.JPG (396 Downloads)
Sindhu@keas Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

5/10/2012 4:16 PM	Rate (0)
koenb Silver Member Joined: 6/26/2009 Last visit: 11/26/2020 Posts: 120 Rating: (19)	Attached an example of how we do the wiring for a 2wire current sensor. Consider the output of your barrier as our B2 sensor. A101 is the Analog input module. Attachment An_in_wiring.JPG (418 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users soju

|

Share this page:

Share this page on...

Follow us on