Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinumerik 808D and Spindle

Created by: Viktor_Nechet at: 12/22/2013 5:39 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

12/22/2013 5:39 PM	Rate (0)
Viktor_Nechet Posts: 2 Rating: (0)	I have turning machine whith Sinumerik 808D. Spindle Gear have 3 step. 1) 2500rpm max 2) 800rpm max 3) 300rpm max Spindle motor can whirling at a speed 4500 rpm Spindle Encoder 1024 ppm I'm confused in the settings of the spindle.Please explain how to configure Spindle options for harmoniz the task to spindle and actualspindle speed. Thank you.
Viktor_Nechet Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

1/7/2014 10:15 AM	Rate (0)
APC Tech Team Gold Expert Joined: 9/25/2012 Last visit: 10/22/2020 Posts: 387 Rating: (49)	Dear Viktor_Nechet The gear change sequence is described in the Sinumeik 808D Function manual (Section :Spindle). Do you have acces to the manuals for Sinumerik 808D? www.automation.siemens.com Search for this ID: 67319013 I enclose the pages which deal with gear change for your convenience regards Andrew E. Grimshaw Attachment D:\Falcon I\Falcon_Manual\Sinumerik 808D Gear change.pdf (75 Downloads)

Suggestion To thank Quote Answer

8/25/2020 7:47 AM	Rate (0)
e_skazem Experienced Member Joined: 5/18/2015 Last visit: 12/16/2020 Posts: 57 Rating: (1)	hello I have a same problem and unfortunately Attachment link not work please set this file again thanks

Suggestion To thank Quote Answer

8/25/2020 10:41 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 1/15/2021 Posts: 4398 Rating: (73)	Hi e_skazem, I was able to download the pdf file from the link. I attached it for you again, pleasy try it out. Regards, Jen_Moderator Attachment D__Falcon I_Falcon_Manual_Sinumerik 808D Gear change.pdf (12 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users PISCEAN 2010

|

Share this page:

Share this page on...

Follow us on