Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SMC20 with Cx32

Created by: TCDSC at: 3/5/2013 5:50 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/5/2013 5:50 PM	Rate (0)
TCDSC Member Joined: 2/24/2011 Last visit: 4/11/2018 Posts: 5 Rating: (0)	I am using 2 Cx32's with a D435 controller. On the Cx32's I have SMC20 modules connected with 1FK7015-5AK71-1AA3 motors. I have 10 of the SMC motor combinations. 6 on one Cx32 and 4 on the other. I am getting a fault code of 31806 and 31150 on all 10 drives. In commissioning I entered the correct motor and encoder information. What am I missing?

Suggestion To thank Quote Answer

3/5/2013 8:10 PM	Rate (0)
Deleted User Posts: 767 Rating: (62)	Hello TCDSC, I recommend routing each of the SMC20 components directly into its respective motor module. This is the default arrangement for routing the encoder feedback signals. Then route the motor modules to thier respective CX32 for which they are controlling. Then route the CX32's to the SIMOTION D435 controller. Best Regards, Deputy Attachment D:\tmp\upload\SIMOTION CX32_CX32_#_1.jpg (48 Downloads)
Deleted User Posts: 767 Rating: (62)	Last edited by: CS Moderator at: 3/6/2013 10:23 PM Attachment reattached
Suggestion To thank Quote Answer

3/5/2013 8:15 PM	Rate (0)
TCDSC Member Joined: 2/24/2011 Last visit: 4/11/2018 Posts: 5 Rating: (0)	That's how the network is setup. The topology is correct, and I can identify each SMC20 via LED correctly. The problem is errors on intializing the encoders.

Suggestion To thank Quote Answer

3/6/2013 7:30 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/6/2020 Posts: 17611 Rating: (2131)	Hello, which encodercable do you use? Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on