Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Step 7 V5.4 on Windows 7 64 bit platform

Created by: sadrud at: 8/17/2010 6:29 AM (16 Replies)

Rating (2)

Thanks 4

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

8/25/2010 9:46 PM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 2/9/2021 Posts: 414 Rating: (28)	As you might have noticed, the currently released version of STEP7 V5.5 is purely suitable for Windows 32-bits versions. Around the summer of 2011 a 64-bits versionmight bereleased.
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank Quote Answer

8/30/2010 8:38 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 1/7/2021 Posts: 10217 Rating: (1159)	I expect a little bit earlier. Let's say on spring with SP1 of v/5.5. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

9/17/2010 9:14 AM	Rate (1)
BlackIsle Regular Member Joined: 10/29/2007 Last visit: 12/3/2020 Posts: 9 Rating: (1)	Step 7 5.5 installer will refuse to install on Windows 7 X64 but seems fine with Windows 7 X32 as the supported OS says. Step 7 5.4 will run without problems under the "XP Mode" of Windows 7 as long as your online communication with the PLC is using either ethernet or USB connection devices. PCMCIA (Like the CP5512 Profibus card) is unlikely to work in "XP Mode". WinCC Flex will also run fine in XP Mode.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users dchartier

8/10/2011 3:55 PM	Rate (0)
Gigabyte Regular Member Joined: 9/10/2009 Last visit: 3/26/2019 Posts: 1 Rating: (0)	Step 7 V5.5 SP1 can be run at following operating systems: - Win XP prof SP2 or SP3 - Win Server 2003 R2 SP2 standard workstation - Win Server 2008 R2 64bit - Win 7 32/64 bit ultimate, professional orenterprise
	Last edited by: Gigabyte at: 8/10/2011 3:55 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users IBN-Service

8/16/2011 4:50 PM	Rate (1)
Azteke0110 Silver Expert Joined: 1/11/2011 Last visit: 2/26/2021 Posts: 376 Rating: (56)	Hello Sadrud, for Windows 7 (64 bit operating system) is possible you use STEP 7 V5.5 with ServicePack 1. The ServicePack1 will be available in short time as a download. Best Regards Azteke0110

Suggestion To thank Quote Answer

9/29/2011 11:47 AM	Rate (0)
josernt Member Joined: 9/29/2011 Last visit: 4/12/2020 Posts: 1 Rating: (0)	Hi If any have STEP7 V5.4 updation for Windows7 plz send me the link Thanks Regards Jose T

Suggestion To thank Quote Answer

9/29/2011 9:38 PM	Rate (0)
Marciano Bronze Member Joined: 4/30/2007 Last visit: 10/16/2020 Posts: 229 Rating: (20)	Just comming from the oven! Service Pack 1 for STEP 7 V5.5 ... for download http://support.automation.siemens.com/WW/view/en/52336451

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on