9/5/2014 9:55 AM | |
Joined: 10/10/2005 Last visit: 4/18/2024 Posts: 1917 Rating: (132) |
Hello, it is possible, that the driver in refer to the online connection are not up to date. This is a basicly reason after an image installation. See in this case the FAQ: http://support.automation.siemens.com/WW/view/en/99005532 With best regards |
This contribution was helpful to2 thankful Users |
2/18/2015 5:23 PM | |
Posts: 91 Rating: (4) |
Thanks to Cicero for this one -- this was a weird one that was very hard to figure out what was wrong until I finally stumbled upon this thread. If you are having accessible device problems in TIA Portal - start here first. Or upgrade to TIA v13 SP1. |
3/26/2018 12:30 PM | |
Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1050) |
hi, please tell us how you are connected to your devices. Which SW are you using? Have also a try and deactivate your anti-virus-scan. There is nothing to lose by trying this Try to install the Automation Tool It contains a little programm, that repairs the interfaces. regards, |
FCK WAR! |
|
3/26/2018 12:46 PM | |
Joined: 7/15/2011 Last visit: 10/19/2023 Posts: 48 Rating: (0) |
Hi, connected via LAN cable. software using is Step 7 V5.5 +SP4 +HF11. |
4/9/2018 2:59 PM | |
Joined: 3/5/2014 Last visit: 8/5/2022 Posts: 5521 Rating: (1050)
|
hi pachu, there is no router or something else between your PC and the PLC? have you tried to disable the anti-virus-scan? did you try to install the Automation Tool? SIMATIC Automation Tool - the commissioning and service operation tool for SIMATIC modules |
FCK WAR! |
|
Follow us on