Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Switching time of bypass contactor

Created by: TDzodzo at: 5/28/2014 12:24 PM (19 Replies)

Rating (5)

Thanks 0

Result pages:: |; 1 | 2; |

20 Entries

Entries per page: 10 | all

5/28/2014 12:24 PM	Rate (0)
TDzodzo Member Joined: 10/2/2013 Last visit: 4/20/2020 Posts: 8 Rating: (0)	Dear colleagues, Do you know what is the time required for switching the integrated bypass contactor once the starting time is over? Or it is depenent on particular application you have? Many thanks in advance.
	Last edited by: TDzodzo at: 5/28/2014 12:25 PM
Suggestion To thank Quote Answer

5/28/2014 2:04 PM	Rate (2)
aakash parashar Regular Member Joined: 5/12/2014 Last visit: 6/13/2014 Posts: 28 Rating: (4)	Dear colleagues, Do you know what is the time required for switching the integrated bypass contactor once the starting time is over? Or it is depenent on particular application you have? Hi friends The time required for switching the integrated bypass contactor depends on the type of load we are using like crushers,blower,conveyors etc generally we set start time in between 10sec to 15sec after the start is over bypass contactor pick up. Yes it depends on particular operation but for few second. regard aakash

Suggestion To thank Quote Answer

5/28/2014 6:08 PM	Rate (0)
metwally mustafa Silver Member Joined: 10/10/2010 Last visit: 3/7/2020 Posts: 296 Rating: (14)	this time is depending on the starting time of the motor and this is depending on the power rate of the motor

Suggestion To thank Quote Answer

5/28/2014 9:11 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 5/13/2020 Posts: 10198 Rating: (1152)	To continue the thread - what kind of symptoms are visible if time is too short or too long? How to to be sure the time is configured correctly? Best regads, Hristo Mihalev

Suggestion To thank Quote Answer

5/28/2014 9:22 PM
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 3/10/2020 Posts: 5564 Rating: (661)	Hello, Please Umencho don't ask questions where we have to use our brains for. I have a headache already regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion Quote Answer

5/29/2014 9:46 AM	Rate (0)
TDzodzo Member Joined: 10/2/2013 Last visit: 4/20/2020 Posts: 8 Rating: (0)	Thank you for your answer, Aakash, but I must be more precise. My question was what is the time needed for contact to switch (in miliseconds), when starting time is finished, not what is required setting the starting time. I hope you can provide me this info.

Suggestion To thank Quote Answer

5/29/2014 10:41 AM	Rate (2)
Valli Bronze Member Joined: 1/5/2009 Last visit: 4/24/2019 Posts: 261 Rating: (45)	Dude ! I wonder, Why do you need to know this data? What is your application and how is it going to effect if that time ( millisecond) is more or less.
	Last edited by: Valli at: 5/29/2014 11:25 AM Last edited by: Valli at: 5/29/2014 10:47 AM
Suggestion To thank Quote Answer

5/29/2014 11:58 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 5/13/2020 Posts: 10198 Rating: (1152)	All details is written in contactor's data sheet. ~~Use a software which can make recording in ms and see there the duration of time between command and feedback...~~ AsVallialready asked you... we are again in close loop.
	Last edited by: UMENCHO at: 5/29/2014 11:59 AM
Suggestion To thank Quote Answer

5/29/2014 12:27 PM	Rate (0)
TDzodzo Member Joined: 10/2/2013 Last visit: 4/20/2020 Posts: 8 Rating: (0)	Thank you, I need this info because one of our client asked me that. It is not important to me, I just wanted to know if there is exact value for this that it iswrittensomewhere. I couldn't find it anywhere.

Suggestion To thank Quote Answer

5/29/2014 12:35 PM	Rate (1)
jeet2907 Experienced Member Joined: 7/3/2013 Last visit: 7/1/2016 Posts: 235 Rating: (52)	TDzodzo Dear colleagues, Do you know what is the time required for switching the integrated bypass contactor once the starting time is over? Or it is depenent on particular application you have? Many thanks in advance. Dear TDzodzo, Its nearer to 50ms. for more detail please find attached sheet. Kind Regards Attachment Timer.pdf (54 Downloads)
	"It’s better to give than to receive. Especially advice"
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on